Chrotech epoxy floor paint is water-based and two-component. It is designed to protect concrete and metal surfaces, with resistance to abrasion, scratching, water and mild chemicals. It is suitable for indoor industrial floors and walls, parking areas, workshops and warehouses, as well as spaces where solvent-based products are avoided due to its low odour.
The application surface must be dry and free of dust, oil and rust. Cracks and chips should be filled with epoxy putty. Before application, stir Component A thoroughly, then gradually add Component B while stirring continuously. The paint can also be used as a primer; as a topcoat, apply two coats. New metal surfaces require an anti-rust primer.
- Type: Two-component epoxy floor paint
- Weight: 5 kg
- Colour: Turquoise
- Base: Water-based
- Suitable surfaces: Concrete and metal
- Resistance: Abrasion, scratching, water and mild chemicals
- Suitable areas: Indoor industrial floors and walls, parking areas, workshops and warehouses
- Mixing ratio: 5A:1B by weight
- Pot life: More than 6 hours at 10 °C, 2–3 hours at 20 °C and ½–1 hour at 30 °C
- Application methods: Brush, roller, air spray gun and airless spray gun
- Thinning: With water
- Application as a topcoat: 2 coats
- Surface preparation: Sand and remove loose material, irregularities, dust, oil and rust
Specifications
- Type
- Floor Painting
- Colour
- Turquoise
- Acrilyc
- No
Quantity
- Weight
- 5 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.