Ceramic Enamel Paint 45ml Pébéo
Pébéo Ceramic paints are solvent-based enamel paints for decoration that air-dry without oven baking. They create an opaque, intense surface with a glossy lacquer finish, a hard-wearing film and very good lightfastness. They can be used on porcelain, terracotta, earthenware, clay and ceramics, as well as wood, metal, glass, Plexiglas, plastic, picture frames and canvas.
- Opaque, highly glossy paints with an enamel-like lacquer finish
- Air-dry without an oven or baking
- Hard-wearing, even film with good hardness and very good lightfastness
- All colours can be mixed together
- Can be combined with Vitrail, Fantasy Prisme and Fantasy Moon for effects and marbling
- Apply with a brush, sponge, palette knife, pipette or stencil, or by dipping
- When applied in a thick layer, they can be combined with sand or other materials and scratched with a wooden stick while still wet
- Made in France by Pébéo
Before you begin: shake the bottle well. On porous surfaces such as terracotta and wood, first apply a primer to seal the pores; otherwise, the surface will absorb the paint and lose its shine. On smooth surfaces, do not overload the brush, as the paint may run. After use, wipe the bottle neck and close the cap tightly.
For outlining: Cerne Relief tubes can be applied directly from the nozzle to create raised lines. Fill the spaces with Ceramic paints to create clean, distinct designs.
Ceramic or Porcelaine 150? Ceramic paints are solvent-based and air-dry, and are for decorative use only. Porcelaine 150 paints are water-based and oven-baked in a household oven, making them dishwasher-safe. If the item is intended for use, choose Porcelaine 150.
Items painted with Ceramic are for decorative purposes only and are not intended to come into contact with food. Once dry, wash gently by hand with water or glass cleaner; do not soak or put in the dishwasher. Use in a well-ventilated area and keep away from children.
Contents: 45ml
Base: solvent-based (alkyd)
Finish: opaque, glossy lacquer
Drying: touch-dry in 2 hours; fully hardened in 10 hours, depending on layer thickness, temperature and humidity
Coverage: 45ml covers approximately 0.5 m²
Thinning: odourless white spirit or turpentine
Tool cleaning: odourless white spirit or turpentine, then rinse with soapy water
