The Gledopto Elite 2D-EXMU Advanced WLED Controller (GL-C-616WL) is an ESP32-based digital LED controller with WLED firmware preinstalled. It is designed to control addressable digital LED strips and LED modules such as WS2811, WS2812B, WS2813, WS2815, SK6812, UCS2903B, SM16703 and other compatible LED ICs.

The controller features two independent LED outputs, allowing you to control two different lighting zones or LED strips separately. Its built-in digital microphone enables WLED Audio Reactive effects, allowing the lighting to respond dynamically to sounds or music. A built-in relay physically disconnects power to the connected LED strips when they are switched off, reducing standby power consumption.

The Gledopto Elite 2D-EXMU is the Ethernet-enabled version of the GL-C-615WL. As part of the Elite product family, it features a redesigned circuit board, a replaceable fuse, factory-configured WLED firmware and a dedicated GPIO port for custom deployments. The built-in RJ45 Ethernet connection provides an exceptionally stable, low-latency network connection, making it especially suitable for large LED installations, professional lighting control systems and applications where network stability and minimal latency are essential.

The controller works fully even without an internet connection, with all WLED features available over the local network. It is highly recommended for users of Home Assistant, Node-RED, MQTT and other open-source automation platforms.

The Gledopto Elite 2D-EXMU is primarily intended for technically experienced users. Most technical support is available through WLED documentation and community forums.

• Elite hardware: Higher-end version with built-in Ethernet connectivity.
• ESP32 platform: High-performance microcontroller optimized for WLED firmware.
• Factory-installed WLED firmware: Preinstalled and ready to use.
• Two independent LED outputs: Control two separate LED zones independently.
• Built-in Ethernet port: RJ45 connection for improved stability and lower latency.
• Built-in microphone: Supports Audio Reactive lighting effects.
• LED power control: Physically disconnects power to the LEDs when switched off.
• Replaceable fuse: Simplifies maintenance and servicing.
• GPIO expansion port: Supports custom hardware deployments.

Technical Specifications:

• Model: Gledopto Elite 2D-EXMU Advanced WLED Controller (GL-C-616WL)
• Controller platform: ESP32
• Firmware: WLED preinstalled
• Supply voltage: 5 V DC / 12 V DC / 24 V DC
• Communication: 2.4 GHz Wi-Fi and RJ45 Ethernet
• LED outputs: 2 independent digital outputs
• Maximum total output current: 15 A
• Maximum output current per channel: 10 A
• USB: USB Type-C (5 V / max. 3 A) for firmware updates
• Built-in relay: LED power control
• Housing: Flame-retardant PC plastic
• Protection rating: IP20
• Operating temperature: -20°C to +45°C
• Dimensions: 129 × 50 × 23 mm