Vitex X-BOND PRIMER quartz acrylic adhesion primer is intended for plasterboard and other smooth or non-absorbent surfaces. The quartz sand creates a rough surface suitable for applying tiles, skim coat, polished cement screed, plaster and external thermal insulation systems. It is ready to use and offers high alkali resistance.
Apply one coat with a roller or brush, preserving its textured finish. Surfaces must be clean and dry, free of dust, oil or loose material. Plaster or cement screed can be applied after 8–10 hours, depending on the coating thickness and weather conditions. Clean tools with water.
- Type: Adhesion primer
- Composition: Acrylic resins and quartz sand
- Features: Quartz-filled, acrylic, adhesion-promoting, high alkali resistance
- Surfaces: Interior
- Suitable for: Plasterboard, exposed concrete, tiles, marble, mosaic, metal surfaces, cement boards and polystyrene insulation boards
- Colour: Light grey
- Application: One coat with a roller or brush
- Dilution: Not required
- Touch dry: 2–3 hours
- Time before applying plaster or cement screed: 8–10 hours
- Coverage: 8–12 m²/L per coat
- Viscosity: 100 ± 10 KU (ASTM D 562, 25 °C)
- Density: 1.40 ± 0.02 kg/L (ISO 2811)
- VOC content: Up to 29 g/L
- Volume: 3 L
- Application temperature: 5–35 °C
- Relative humidity during application: Below 80%
- Storage: 5–38 °C, in a sealed container and a shaded place
Specifications
- Genre
- Primer
- Surface Material
- Plasterboard
- Surfaces
- Internal
- Properties
- Quartz, Adhesion, Acrylic
Quantity
- Mass Gaining
- 3 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.