Skroutz.mt

Kraft & Dele Inverter Plasma Cutter 65A
Welding Machines

Kraft & Dele Inverter Plasma Cutter 65A

The Plasma Cutter 65A 15mm KD3425 is an IGBT technology device designed for fast and precise cutting of various types of metal. The use of a pulse inverter has reduced the size and weight of the main...

The Plasma Cutter 65A 15mm KD3425 is an IGBT technology device designed for fast and precise cutting of various types of metal. The use of a pulse inverter has reduced the size and weight of the main transformer while increasing the device’s efficiency by 30%. The KD3425 model uses a high-frequency pilot arc system, making it easier to ignite the arc and...

See full description See full description

Top specs

  • Welding Current

    65

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    220

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The Plasma Cutter 65A 15mm KD3425 is an IGBT technology device designed for fast and precise cutting of various types of metal. The use of a pulse inverter has reduced the size and weight of the main transformer while increasing the device’s efficiency by 30%. The KD3425 model uses a high-frequency pilot arc system, making it easier to ignite the arc and start working. The device features gas pre-flow and post-flow functions. Its high cutting speed and smooth performance produce clean edges without the need for additional grinding. It is suitable for cutting stainless steel, alloy steel, mild steel, copper and other non-ferrous metals.

  • IGBT technology ensures stable operation
  • Designed for plasma metal cutting
  • Pilot arc system makes arc ignition easy
  • High-frequency (HF) oscillation
  • Gas pre-flow and post-flow functions
  • High cutting speed and smooth performance
  • Can cut materials from 1 to 15 mm thick
  • Lightweight, compact inverter design
  • Efficient operation and low noise
  • Suitable for stainless steel, alloy steel, mild steel, copper and other non-ferrous metals

Technical specifications:

  • Model: KD3425
  • Technology: IGBT
  • Supply voltage: 220 V
  • Input capacity: 14.95 kW
  • No-load voltage: 254 V
  • Output current: 65 A
  • Output voltage: 96 V
  • Duty cycle: 60% (65A) / 100% (50A)
  • Pilot arc type: HF oscillation
  • Inner torch diameter: 0.8 mm
  • Compressor pressure: 4 kg
  • Cutting thickness range: 1–15 mm

Package contents:

  • Plasma Cutter 65A 15mm KD3425
  • Plasma torch with cable
  • Ground cable with clamp
  • Welding mask
  • Wire brush
  • Accessory bag
  • User guide in Polish
  • Original packaging
  • Receipt or VAT invoice

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
65 A

Welding Current (max): 65


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Weight
4000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Plasma Cutter 65A 15mm KD3425 is an IGBT technology device designed for fast and precise cutting of various types of metal. The use of a pulse inverter has reduced the size and weight of the main transformer while increasing the device’s efficiency by 30%. The KD3425 model uses a high-frequency pilot arc system, making it easier to ignite the arc and start working. The device features gas pre-flow and post-flow functions. Its high cutting speed and smooth performance produce clean edges without the need for additional grinding. It is suitable for cutting stainless steel, alloy steel, mild steel, copper and other non-ferrous metals.

  • IGBT technology ensures stable operation
  • Designed for plasma metal cutting
  • Pilot arc system makes arc ignition easy
  • High-frequency (HF) oscillation
  • Gas pre-flow and post-flow functions
  • High cutting speed and smooth performance
  • Can cut materials from 1 to 15 mm thick
  • Lightweight, compact inverter design
  • Efficient operation and low noise
  • Suitable for stainless steel, alloy steel, mild steel, copper and other non-ferrous metals

Technical specifications:

  • Model: KD3425
  • Technology: IGBT
  • Supply voltage: 220 V
  • Input capacity: 14.95 kW
  • No-load voltage: 254 V
  • Output current: 65 A
  • Output voltage: 96 V
  • Duty cycle: 60% (65A) / 100% (50A)
  • Pilot arc type: HF oscillation
  • Inner torch diameter: 0.8 mm
  • Compressor pressure: 4 kg
  • Cutting thickness range: 1–15 mm

Package contents:

  • Plasma Cutter 65A 15mm KD3425
  • Plasma torch with cable
  • Ground cable with clamp
  • Welding mask
  • Wire brush
  • Accessory bag
  • User guide in Polish
  • Original packaging
  • Receipt or VAT invoice

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
65 A

Welding Current (max): 65


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Weight
4000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.