Skroutz.mt

Kraft & Dele 60A Inverter Plasma Cutter
Welding Machines

Kraft & Dele 60A Inverter Plasma Cutter

The KD3426 plasma cutter features IGBT technology for fast, precise cutting of various types of metal. The inverter power supply has reduced the size and weight of the main transformer while...

The KD3426 plasma cutter features IGBT technology for fast, precise cutting of various types of metal. The inverter power supply has reduced the size and weight of the main transformer while increasing the device’s efficiency by 30%. The KD3426 uses a high-frequency oscillating pilot system, making it easier to start the arc and begin work. The device...

See full description See full description

Top specs

  • Welding Current

    60

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    220

    It is the supply voltage that the machine requires from the electrical grid.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The KD3426 plasma cutter features IGBT technology for fast, precise cutting of various types of metal. The inverter power supply has reduced the size and weight of the main transformer while increasing the device’s efficiency by 30%. The KD3426 uses a high-frequency oscillating pilot system, making it easier to start the arc and begin work. The device includes gas pre-flow and post-flow functions. Its high speed and smooth cutting deliver clean edges without the need for additional grinding. The machine is suitable for cutting stainless steel, alloys, mild steel, copper, and other non-ferrous metals.

Product features:

  • IGBT technology for stable system operation
  • Designed for plasma metal cutting
  • Pilot system facilitates cutting startup
  • High-frequency HF oscillation
  • Gas pre-flow and post-flow functions
  • High-speed, smooth cutting
  • Can cut materials from 1 to 15 mm thick
  • Lightweight, compact inverter design
  • Efficient operation with low noise
  • Suitable for stainless steel, alloys, mild steel, copper, and other non-ferrous metals

Technical data:

  • Model: KD3426
  • Technology: IGBT
  • Supply voltage: 220 V
  • Input power: 13.8 kW
  • No-load voltage: 254 V
  • Output current: 60 A
  • Output voltage: 96 V
  • Duty cycle: 60% (60A) / 100% (46A)
  • Pilot type: Oscillating HF
  • Inner torch diameter: 0.8 mm
  • Compressor pressure: 4 kg
  • Cutting thickness range: 1–15 mm

Package contents:

  • 60A 15mm KD3426 plasma cutter
  • Plasma torch with cable
  • Ground cable with clamp
  • Welding mask
  • Wire brush
  • Transparent hose
  • Pressure regulator with gauge
  • Mounting accessories
  • User manual in Polish
  • Original packaging

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
60 A

Welding Current (max): 60


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Weight
4000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The KD3426 plasma cutter features IGBT technology for fast, precise cutting of various types of metal. The inverter power supply has reduced the size and weight of the main transformer while increasing the device’s efficiency by 30%. The KD3426 uses a high-frequency oscillating pilot system, making it easier to start the arc and begin work. The device includes gas pre-flow and post-flow functions. Its high speed and smooth cutting deliver clean edges without the need for additional grinding. The machine is suitable for cutting stainless steel, alloys, mild steel, copper, and other non-ferrous metals.

Product features:

  • IGBT technology for stable system operation
  • Designed for plasma metal cutting
  • Pilot system facilitates cutting startup
  • High-frequency HF oscillation
  • Gas pre-flow and post-flow functions
  • High-speed, smooth cutting
  • Can cut materials from 1 to 15 mm thick
  • Lightweight, compact inverter design
  • Efficient operation with low noise
  • Suitable for stainless steel, alloys, mild steel, copper, and other non-ferrous metals

Technical data:

  • Model: KD3426
  • Technology: IGBT
  • Supply voltage: 220 V
  • Input power: 13.8 kW
  • No-load voltage: 254 V
  • Output current: 60 A
  • Output voltage: 96 V
  • Duty cycle: 60% (60A) / 100% (46A)
  • Pilot type: Oscillating HF
  • Inner torch diameter: 0.8 mm
  • Compressor pressure: 4 kg
  • Cutting thickness range: 1–15 mm

Package contents:

  • 60A 15mm KD3426 plasma cutter
  • Plasma torch with cable
  • Ground cable with clamp
  • Welding mask
  • Wire brush
  • Transparent hose
  • Pressure regulator with gauge
  • Mounting accessories
  • User manual in Polish
  • Original packaging

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
60 A

Welding Current (max): 60


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
30 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
220 V

Supply Voltage: 220


It is the supply voltage that the machine requires from the electrical grid.
Weight
4000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
Yes

Pulsed


Instead of remaining constant during welding, the current increases and decreases in pulses at specified time intervals.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.