The EKWB EK-QuantumX Loophole distribution plate combines a reservoir, pump and tube routing, with the tubing route adjustable using micro angle adapters and fittings. It mounts to 140 mm fans and complies with the EK-Matrix7 standard. The plate and pump cover are made of black anodized aluminum.
The D5 PWM pump operates on a 12 V DC power supply, draws 23 W and connects via SATA and a 4-pin PWM FAN connector. Without a PWM signal, it runs at 100%, while the PWM duty cycle ranges from approximately 20% to 100%.
- Color: Black
- Pump type: D5 PWM
- Power supply: 12 V DC
- Power consumption: 23 W
- Connections: SATA and 4-pin PWM FAN
- PWM duty cycle: Approximately 20%–100%
- Operation without a PWM signal: 100%
- Maximum head: 3.9 m
- Maximum flow rate: 1,500 L/h
- Maximum system temperature: 60 °C
- Dimensions with pump installed (W × D × H): 140 × 87 × 294 mm
- Capacity: Approximately 562 ml
- Ports: 34 G1/4″
- Pump materials: Stainless steel, PPS-GF40, EPDM seals, aluminum oxide and activated carbon
- Package contents: EK-QuantumX Loophole Distroplate D5 PWM - Black, EK-Quantum Convection D5 - Black, 8 M3x20 mounting screws, 8 acetal spacers, 8 M4 0.8 mm metal washers, 2.5 mm and EK-Loop Multi (6 mm, 8 mm, 9 mm) hex keys, 32 nickel-plated brass plugs and 32 EK-Quantum Torque plug covers - black
- Colour
- Black
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.