Monto polyurethane bituminous waterproofing coating is reinforced with glass microfibres, which improve its mechanical properties. Its elastic formula is waterproof and resistant to expansion and contraction, helping to prevent cracks and protect against moisture. It can be applied without additional mesh to exterior horizontal and vertical surfaces, such as rooftops, balconies, roofs, façades and roof joints.
Suitable for porous tiles and bricks, cement screed, concrete and bituminous membranes. For waterproofing, apply 2–3 coats, with a recommended total coverage of 1.5 L/m², depending on the surface and application method. Slightly dilute the first coat according to the porosity and condition of the surface. Use water for dilution and cleaning tools.
- Type: Polyurethane bituminous waterproofing coating
- Capacity: 0.75 L
- Reinforcement: Glass microfibres
- Colour: Terracotta
- Finish: Smooth
- Application surfaces: Roof tiles, rooftops, walls and tiles
- Surface materials: Brick, cement-based surfaces and bituminous membranes
- Touch-dry time: 2–4 hours at 20 °C and 60% relative humidity
- Recoat time: At least 24 hours at 20 °C and 60% relative humidity
- Recommended coverage: 1.5 L/m² in 2–3 coats, depending on the surface and application method
- Application temperature: Above 5 °C and below 35 °C
- Dilution and cleaning: With water
- Additional features: Waterproof, contains an anti-mould preservative, and resists expansion and contraction
Product Details
- Type
- Powder
- Application Surface
- Tiles, Terrace, Wall, Tiles
- Application Surface Material
- Brick, Cementitious, Bituminous Membrane
Additional Specifications
- Polyurethane
- Yes
- Elastomer
- No
- Acrylic
- No
- Bituminous
- Yes
- Cementitious
- No
- 2-Component
- No
Packaging
- Capacity
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.