The Forensics Detectors FD-TRAVEL001 portable gas detector detects carbon monoxide (CO) in a range of 9–999 ppm and displays the reading in ppm. It features a Japanese-made electrochemical sensor and intelligent detection algorithms. The alarms activate at 9 ppm with a red LED and at 25 ppm with a 70 dB audible buzzer, while for concentrations above 9 ppm, the alert is triggered after 60 seconds.
It is operated with a single button, while the blue LED indicates the maximum reading. The device uses diffusion sampling without a pump and has a sensor life of 5 years. Its housing is made of ABS plastic, and its dimensions are 6.9 × 4.7 × 2.0 cm.
- Gas type: Carbon monoxide (CO)
- Detection range: 9–999 ppm
- Resolution: 1 ppm
- Measurement average: 0.5 seconds
- Sensor type: Electrochemical
- Sensor life: 5 years
- Sampling type: Diffusion, no pump
- CO alarm: At 9 ppm with a red LED and at 25 ppm with a buzzer
- Buzzer volume: 70 dB at a distance of 1 m
- Maximum reading indicator: Blue LED
- Accuracy: ±10% of the CO reading
- Operating pressure: 1 bar nominal, range 0.8–1.2 bar
- Storage and operating temperature: −10 to 50 °C
- Storage and operating humidity: 15–90% RH
- Dimensions: 6.9 × 4.7 × 2.0 cm
- Weight: 51 g
- Housing material: ABS plastic
- Batteries: 2 × CR2032
- Battery life: 6–8 months on standby
- Explosion protection certification: ATEX Ex ib IIC T4 Gb
- Package contents: CO detector, 2 installed CR2032 batteries, plastic case-style holder and user manual
- Type of Gas
- CO
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.