Kraft Profi Exterior plastic paint is a white acrylic water-based paint for exterior surfaces. It withstands sunlight, rain and air pollution, while its breathability helps prevent moisture from building up on the surface. It adheres to plaster, cement and plasterboard, and can be applied with a brush, roller or airless spray gun.
Dilute with tap water; applying two coats is recommended. It becomes surface-dry in 1–2 hours at 25°C and 50% relative humidity, and the minimum time before recoating is 4–6 hours. Before application, the surface must be dry, sound and clean.
- Type: Acrylic water-based paint
- Use: Exterior
- Colour: White
- Quantity: 2.85 L
- Resistance: Sunlight, rain and air pollution
- Suitable surfaces: Plaster, cement and plasterboard
- Application tools: Brush, roller or airless spray gun
- Dilution: 5–10% by volume with tap water
- Coverage per coat: 10–12 m²/L, depending on the shade, application method and surface absorbency
- Surface drying time: 1–2 hours at 25°C and 50% relative humidity
- Recoating time: 4–6 hours
- Coats: 2
- Density at 25°C: 1.31–1.55 g/mL, depending on the base and shade
- Solids by weight: 61% (±3)
- pH: 8.6–9.6
- Gloss at 60°: < 3.0 GU
- Dry film thickness: 70 μm (±5) in 2 coats
- Maximum VOC content: 39 g/L
- Storage: Between 5°C and 35°C
- Preparation of new surfaces: Apply one coat of water-based primer and allow plaster or cement to dry completely for at least 30 days
- Repairs: Use Kraft Spachtel or Kraft Putty
- Application temperature: Between 5°C and 35°C
- Cleaning tools: Immediately after use, with warm water and soap
- Product Number
- JK33104D00014
- Usage
- Exterior
- Quantity
- 2.85 lt
- Features
- Acrilyc, Watercolor, Ecological
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.