Berling Beto-floor floor paint is a one-component, solvent-based alkyd-polyurethane paint for concrete floors, pavements, paved surfaces, plaster, bricks and stone. It can be used indoors and outdoors and offers good adhesion and coverage, with resistance to moderate wear, cement alkalinity and changing weather conditions.
Apply in two coats to clean, new surfaces. On previously painted surfaces, remove old and peeling paint with sandpaper and apply a solvent-based primer before applying the two coats of paint. If the surface is clean, apply the paint directly. Thin with White Spirit up to 15% by volume, depending on the application method, and apply with a brush or roller.
- Type: One-component, solvent-based alkyd-polyurethane
- Colour: White
- Use: Interior and exterior
- Suitable surfaces: Concrete floors, pavements, paved surfaces, plaster, bricks and stone
- Resistance: Moderate wear, cement alkalinity and changing weather conditions
- Coverage: 9–11 m²/lt, depending on surface absorbency
- Touch dry: 2–4 hours
- Recoating: After 16 hours
- Thinning: White Spirit, up to 15% by volume
- Application: With a brush or roller
- Tool cleaning: With White Spirit
- Density: 1.40–1.50 g/cm³, depending on the shade
- VOC: Up to 500 g/lt
- Compliance: Directive 2004/42/EC
- Volume: 10 lt
- Weight: 0.5 kg
Specifications
- Type
- Floor Painting
- Colour
- White
- Acrilyc
- No
Quantity
- Volume
- 10 lt
- Weight
- 0.5 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.