Kraft repair mortar is a white powder mortar for smoothing and repairing surfaces, suitable for cement screeds, concrete, render, dry construction and existing coatings. It is also used for non-structural repairs to damaged concrete and render, both indoors and outdoors. It is resin-modified, fibre-reinforced and cement-based, containing polypropylene and carbon fibres.
The mortar is part of the Arterra Patiti polished cement screed system. It is classified as CT-C25-F8 in accordance with EN 13813 and as a PCC R2 concrete repair mortar in accordance with EN 1504-3, and is EMICODE EC2 certified. Apply with a metal trowel in layers 2–10 mm thick, embedding alkali-resistant glass mesh in the upper third of the layer.
- Type: Repair mortar for smoothing and repairs
- Colour: White
- Weight: 25 kg
- Volume: 5 L
- Composition: Resin-modified, fibre-reinforced cement-based mortar
- Reinforcement: Polypropylene and carbon fibres
- Use: Interior and exterior
- Suitable substrates: Cement screeds, concrete, render, dry construction and existing coatings
- Standards: CT-C25-F8 in accordance with EN 13813; PCC R2 in accordance with EN 1504-3
- Certification: EMICODE EC2
- Mixing ratio: 6–6.5 L of water per 25 kg
- Maximum grain size: 800 μm
- Dry mortar density: 1.45 ± 0.05 kg/L
- Fresh mix density: 2.00 ± 0.05 kg/L
- Application temperature: +5°C to +35°C
- Pot life: 3 hours
- Application thickness: 2–10 mm per layer
- Coverage: 1.5 kg/m² per mm of thickness
- Surface drying time: 4 hours
- Compressive strength: ≥ 25 MPa
- Flexural strength: ≥ 8 MPa
- Chloride content: ≤ 0.05%
- Storage: 12 months from the date of manufacture in the original packaging in a dry place
Specifications
- Type
- Paint Remover
- Colour
- White
- Acrilyc
- No
Quantity
- Volume
- 5 lt
- Weight
- 25 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.