Description
Specifications
Vivechrom road marking paint is a single-component specialty paint for marking asphalt, concrete floors in industrial premises and sports courts. It is ready to use without thinning and dries in up to 25 minutes for a dry film thickness of 240 μm. It can be combined with glass beads to create more reflective lines.
Apply with a road-marking machine or, on small surfaces, with a roller or brush. Stir thoroughly before use. Do not apply at temperatures below 10 °C.
- Type: Single-component road marking paint
- Base: Alkyd resin and chlorinated rubber
- Colour: White
- Weight: 25 kg
- Finish: Matt
- Thinning: Not required
- Drying time: Up to 25 minutes for a dry film thickness of 240 μm
- Coverage: 1.76 m²/kg for a 200 μm dry film, 1.41 m²/kg for 250 μm and 1.17 m²/kg for 300 μm
- Specific gravity: 1.57 g/cm³ (ISO 2811)
- Viscosity: 70–80 KU at 25 °C
- Application temperature: 10 °C and above
- Application: With a road-marking machine, roller or brush
- Glass beads: Mix into the paint or spread over the wet paint, at a paint-to-bead ratio of 7:3 by weight
- Tool cleaning: Immediately after use with Vivechrom No. 600 General Purpose Thinner
- Flammable: Keep away from heat, sparks and flames
Specifications
- Type
- Road Marking Paint
- Colour
- White
- Acrilyc
- No
- Luminosity
- Matt
Quantity
- Weight
- 25 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.