Kraft Arterra Patiti Ultra-Fine is a ready-to-use acrylic decorative coating with a polished-cement effect, for interior and exterior walls and floors. It has an ultra-fine finish and is applied in a thin layer, making it suitable for renovations without modifying doors, frames or electrical outlets. Its composition includes acrylic resins, nanotechnology additives and aggregates with graded particle sizes.
The grey shade is integrated throughout the product. It is water-repellent and breathable, with abrasion resistance, adhesion above 1.0 N/mm² and a fire classification of E.
- Type: Decorative acrylic coating
- Colour: Grey
- Weight: 5 kg
- Use: For interior and exterior walls and floors
- Finish: Ultra-fine
- Application thickness: Approximately 1 mm
- Dilution: 0%
- Coverage: 1.5–1.7 kg/m² for 2 coats
- Surface drying time: 1–2 hours
- Time before applying the next coat: 4–24 hours
- Full curing time: 4–7 days
- Density: 1.70 g/mL (±0.1) at 25°C
- Viscosity: 25,000 mPa·s (±5,000) at 25°C
- pH: 8.8 (±0.5)
- Water absorption: w 150 g/(m²·d), according to EN 1062-3
- Reaction to fire: E, according to EN 13501-1
- VOC content: 29 g/L maximum
- Application: Apply in two coats using a flat metal or plastic trowel
- Application temperature: From 5°C to 35°C
- Tool cleaning: Clean immediately after use with warm water and soap
Specifications
- Type
- Deco Paint
- Colour
- Grey
- Acrilyc
- Yes
Quantity
- Weight
- 5 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.