Description
Specifications
Berling Pool Paint is a single-component, solvent-based protective coating for concrete swimming pools, fountains and non-potable water tanks, for indoor and outdoor use. It resists water, moisture, mild acids and other chemical solutions, but not strong acids.
Apply with a brush or roller and dilute with Thinner E by up to 15% by volume. On new surfaces, apply one diluted coat as a primer followed by two topcoats; on old surfaces, apply two coats. Before painting, clean the surface to remove dust and salts, and carry out a moisture test.
- Type: Single-component, solvent-based paint
- Use: Concrete swimming pools, fountains and non-potable water tanks
- Application area: Indoor and outdoor use
- Colour: White
- Volume: 3.5 lt
- Weight: 0.5 kg
- Resistance: Water, moisture, mild acids and other chemical solutions
- Coverage: 4–6 m²/lt, depending on surface absorbency
- Touch-dry time: ½–1 hour
- Recoat time: After 16 hours
- Dilution: Thinner E by up to 15% by volume
- Density: 1.50 ± 0.03 g/cm³
- VOC: Up to 500 g/lt
- Application: Brush or roller
- Tool cleaning: With Thinner E
- New concrete preparation: Allow to dry for at least 27 days at 25 °C and up to 70% humidity
- Cement mortar preparation: Allow to dry for at least 7 days
- Preparation after rain: Wait at least 7 days
Specifications
- Type
- Pool Paint
- Colour
- White
- Acrilyc
- No
Quantity
- Volume
- 3.5 lt
- Weight
- 0.5 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.