Berling swimming pool paint is a one-component, solvent-based protective paint for concrete swimming pools, fountains and non-potable water tanks, for indoor and outdoor use. It resists water, moisture, mild acids and other chemical solutions, but not strong acids. No mixing is required before application.
For application, new surfaces require one primer coat of the same paint, thinned by 12–15% with Thinner E, followed by two topcoats thinned by 0–10%. On previously painted surfaces, apply two coats thinned by 0–10% with Thinner E. Apply with a brush or roller, and clean tools with Thinner E.
- Colour: White
- Suitable for: Concrete swimming pools, fountains and non-potable water tanks
- Use: Indoor and outdoor
- Type: One-component, solvent-based paint
- Resistance: Water, moisture, mild acids and other chemical solutions; not resistant to strong acids
- Coverage: 4–6 m²/l, depending on the surface’s absorbency
- Touch dry: ½–1 hour
- Recoating: After 16 hours
- Thinning: With Thinner E, up to 15% by volume
- Density: 1.50 ± 0.03 g/cm³
- VOC: Up to 500 g/l (Directive 2004/42/EC, subcategory θ)
- Weight: 0.5 kg
- Volume: 700 ml
Specifications
- Type
- Pool Paint
- Colour
- White
- Acrilyc
- No
Quantity
- Volume
- 0.7 lt
- Weight
- 0.5 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.