Berling Beto-floor concrete paint is a one-component, solvent-based alkyd-polyurethane paint for concrete floors, pavements, paved surfaces, plaster, brick and stone. It is suitable for indoor and outdoor use and withstands moderate wear, weather fluctuations and the alkalinity of cement. It offers good adhesion and coverage.
Apply to clean new surfaces in two coats. On previously painted surfaces, remove old and peeling paint with sandpaper, apply one coat of Berling FIXATEUR solvent-based primer, then apply two coats of paint. It can be applied directly to clean, previously painted surfaces. Thin with White Spirit up to 15% by volume, depending on the application method, and apply with a brush or roller, observing the drying and recoating times. Clean tools with White Spirit and dispose of any residue as hazardous waste.
- Type: Floor paint
- Colour: Red
- Composition: One-component, solvent-based alkyd-polyurethane
- Weight: 500 g
- Volume: 750 ml
- Coverage: 9–11 m²/l, depending on the surface’s absorbency
- Touch dry: 2–4 hours
- Recoating: After 16 hours
- Thinning: White Spirit, up to 15% by volume
- Density: 1.40–1.50 g/cm³, depending on the shade
- VOC: Up to 500 g/l
- Directive: Compliant with 2004/42/EC
Specifications
- Type
- Floor Painting
- Colour
- Red
- Acrilyc
- No
Quantity
- Volume
- 0.75 lt
- Weight
- 0.5 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.