Kraft Arterra Patiti Varnish PU Aqua is an impregnating varnish that protects and waterproofs decorative polished concrete finishes on vertical and horizontal surfaces, indoors and outdoors. It is polyurethane-based, water-soluble and colourless, with a matt finish. It can also be applied as a final protective coat over concrete, stone and epoxy, polyurethane or acrylic floor paints.
It contains UV filters and does not yellow. It resists abrasion, scratches and impacts, as well as common cleaning products and household stains. It has a low odour and a low VOC content.
- Type: Impregnating varnish
- Weight: 5 kg
- Colour: Colourless
- Gloss level: Matt
- Composition: Polyurethane
- Dilution: With water, at a ratio of 5–15%
- Suitable surfaces: Polished concrete finishes, concrete, stone and epoxy, polyurethane or acrylic floor paints
- Use: Interior and exterior
- Application: With a short-pile varnish roller or brush, in at least 2 coats
- Coverage: Approximately 0.1 kg/m² per coat
- Pot life: Up to 1 hour
- Mixing ratio: 4:1 by weight (component A: component B)
- Time between coats: Approximately 24 hours
- Density: 1.03 g/mL (±0.05) (A+B)
- Water vapour permeability: sD < 5 m
- Reaction to fire: E
- Maximum VOC content: 139 g/L
- Tool cleaning: Immediately after use, with warm water and soap
- Product Number
- JK34120AB0015
- Type
- Impregnation Varnish
- Surface Material
- Stone, Metal
- Glossiness
- Matte
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- Yes
- 2-Component
- No
- Weight
- 5 kg
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.