Kraft Bodenguard AR-120 primer is a two-component, solvent-based epoxy primer that adheres to metal and other non-absorbent surfaces. It provides anti-corrosion protection for iron and steel structures, both horizontal and vertical, for interior and exterior use. It is applied before epoxy and polyurethane products in the Bodenguard range.
Component A contains epoxy resin, and component B is a polyamide blend. For use as an adhesion primer, apply one coat; two coats provide high anti-corrosion protection. Apply with a roller, brush or airless spray gun.
- Type: Two-component epoxy primer
- Base: Solvent-based
- Properties: Anti-rust and adhesion-promoting
- Application surfaces: Metal and non-absorbent surfaces
- Use: Interior and exterior
- Mixing ratio by weight: 100:20 (A:B)
- Thinning: Optional, 5–15% by weight with Kraft NITRO 2000 thinner
- Coverage: 0.150–0.200 kg/m² per coat
- Pot life: 2.5–3.5 hours at 15°C, 2.0–2.5 hours at 25°C and 1.5–2.0 hours at 35°C
- Drying time: Approximately 3 hours
- Recoating: 16–24 hours
- Curing time: 7 days
- Certifications: CE according to EN 1504-7 and EN 13813
- Pack weight: 5 kg
- Product Number
- JK38297200010
Specifications
- Genre
- Primer
- Surface Material
- Metal
- Surfaces
- Multiprimer
- Properties
- Antirust, Adhesion, Solvent-Base, Polyurethane, Water
Quantity
- Weight
- 5 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.