Kraft Arterra Patiti Nano-Hybrid Primer is a water-based polyurethane hybrid impregnating primer, formulated with nanotechnology and enhanced with silane. It stabilizes absorbent surfaces and regulates their absorbency, providing uniform water repellency. Intended for indoor use on plaster, cement screed, concrete and decorative coating systems, as part of the Arterra Patiti polished cement system.
It is alkali-resistant and helps prevent the decorative coating from darkening after protective varnishes are applied. Dilute with 50–100% water and apply one coat with a roller or brush to a clean, stable substrate with a moisture content below 4%. Surface drying takes approximately 1 hour, while the next coat can be applied after 4 hours. Clean tools immediately with warm water and soap or detergent solution.
- Type: Water-based polyurethane hybrid impregnating primer
- Colour: Clear
- Surfaces: Interior
- Suitable substrates: Plaster, cement screed, concrete and decorative coating systems
- Properties: Adhesion, stabilization of absorbent surfaces and regulation of absorbency
- Resistance: Alkali-resistant
- Dilution: 50–100% with water
- Application: One coat with a roller or brush
- Coverage: 0.1–0.2 kg/m²
- Surface drying: Approximately 1 hour at 25°C and 50% relative humidity
- Time before applying the next coat: 4 hours
- Density: 1.02 g/mL (±0.02)
- Viscosity (sp.2/50rpm): 250 mPa·s (±100)
- Viscosity (Flow Cup No.4): 70 sec (±20)
- pH: 9.0 (±0.5)
- Maximum VOC content: 29 g/L
- Weight: 3 kg
- Product Number
- JK34110000013
Specifications
- Genre
- Primer
- Surfaces
- Internal
- Properties
- Polyurethane, Water, Adhesion
Quantity
- Weight
- 3 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.