Kraft Bodenguard H-250 Primer is a transparent, two-component, water-based epoxy primer. It penetrates absorbent and cementitious surfaces, promoting adhesion and stabilizing them before the application of epoxy or polyurethane products from the Bodenguard and Floorshield ranges, as well as products from the Total Proof range over bituminous membranes or roof terraces.
Apply one coat using a roller, brush or airless spray gun. A second coat is recommended on highly absorbent surfaces. Apply the next coat or topcoat after 24 hours. Mix components A and B at a ratio of 100:20 by weight, then dilute the mixture with water.
- Type: Adhesion and stabilizing primer
- Formulation: Two-component epoxy
- Base: Water-based
- Surfaces: Absorbent and cementitious
- Application area: Indoor and outdoor areas, roof terraces
- Mixing ratio A:B: 100:20 by weight
- Dilution: 5–10% with water
- Application: Roller, brush or airless spray gun
- Coverage: 0.110–0.130 kg/m² per coat
- Pot life: 2.5–3.5 hours at 15 °C, 2.0–2.5 hours at 25 °C, 1.5–2.0 hours at 35 °C
- Time before applying the next coat: 24 hours
- Density: 1.08 g/mL (±0.05) at 25 °C
- Solids by weight: 35.5% (±2)
- Viscosity: 440 mPa.s (±100) at 25 °C
- Adhesion: ≥ 4.0 N/mm²
- BCA abrasion resistance: 30 μm
- Reaction to fire: Efl
- Maximum VOC content: 149 g/L
- Weight: 8.33 kg
- Product Number
- JK38190000018
Specifications
- Genre
- Primer
- Surfaces
- Internal
- Properties
- Water, Adhesion, Polyurethane
Quantity
- Weight
- 8.33 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.