Description
Specifications
Kraft Bodenguard H-250 Primer is a transparent, water-based, two-component epoxy primer. It penetrates absorbent surfaces and is used to promote adhesion and stabilise cementitious substrates before applying epoxy and polyurethane products from the Bodenguard and Floorshield ranges.
Suitable for interior and exterior floors, roof terraces, bituminous membranes and other absorbent surfaces. It has a mild odour and low VOC emissions, and is rated A+ and EMICODE EC2, with CE marking in accordance with EN 13813.
- Type: Two-component epoxy primer
- Base: Water-based
- Properties: Promotes adhesion and stabilises surfaces
- Surfaces: Interior and exterior
- Application: Apply one coat by roller, brush or airless spray gun; a second coat is recommended for highly absorbent surfaces
- Mixing ratio A:B: 100:20 by weight
- Thinning: 5–10% by weight with water
- Pot life: 2.5–3.5 hours at 15 °C, 2.0–2.5 hours at 25 °C and 1.5–2.0 hours at 35 °C
- Time before applying the next coat: 24 hours
- Coverage: 0.110–0.130 kg/m² per coat
- Density: 1.08 g/mL (±0.05) at 25 °C
- Solids by weight: 35.5% (±2)
- Viscosity: 440 mPa·s (±100) at 25 °C
- Adhesion: ≥ 4.0 N/mm² in accordance with EN 13892-8
- BCA wear resistance: 30 μm in accordance with EN 13892-4
- Flexibility on a conical mandrel: ø < 3.5 mm in accordance with ISO 6860
- Reaction to fire: Efl in accordance with EN 13501-1
- Maximum VOC content: 149 g/L in the ready-to-use product
- Weight: 3.33 kg
- Product Number
- JK38190000013
Specifications
- Genre
- Primer
- Surfaces
- Internal
- Properties
- Water, Adhesion, Polyurethane
Quantity
- Weight
- 3.33 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.