Kraft Bodenguard S-150 primer is component B of a transparent, two-component epoxy primer, suitable for indoor and outdoor floors and vertical surfaces. It is added to component A before application and used as a primer coat before applying Bodenguard range epoxy and polyurethane paints. Formulated from a polyamide blend, it adheres to both absorbent and non-absorbent surfaces and offers abrasion resistance.
It stabilizes and seals absorbent surfaces and reduces dust formation. Suitable for concrete and industrial floors, masonry, terrazzo, porous and friable substrates, and paving slabs. CE-marked according to EN 13813 and intended for professional use only.
- Type: Two-component epoxy primer, component B
- Colour: Transparent
- Composition: Polyamide blend
- Application surfaces: Indoor and outdoor floors, vertical surfaces
- Suitable substrates: Concrete and industrial floors, masonry, terrazzo, porous and friable substrates, paving slabs
- Mixing ratio A:B: 75:25 by weight
- Thinning: 5–15% by weight with Kraft NITRO 2000
- Density: 0.99 g/mL (±0.05) at 25 °C
- Weight solids: 56.3% (±2)
- Viscosity: 560 mPa.s (±100) at 25 °C
- Pot life: 2.5–3.5 hours at 15 °C, 2.0–2.5 hours at 25 °C, 1.5–2.0 hours at 35 °C
- Coverage: 0.110–0.130 kg/m² for one coat
- Adhesion: ≥ 6.6 N/mm² according to EN 13892-8
- BCA wear resistance: 30 μm according to EN 13892-4
- Reaction to fire: Efl according to EN 13501-1
- Maximum VOC content: 499 g/L in the ready-to-use product
- Certification: CE according to EN 13813
- Weight: 2.25 kg
- Product Number
- JK38298100014
Specifications
- Genre
- Primer
- Surface Material
- Masonry
- Surfaces
- Multiprimer
- Properties
- Solvent-Base, Polyurethane, Adhesion, Water
Quantity
- Weight
- 2.25 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.