Kraft Arterra Patiti Quartz Primer is an acrylic, quartz-based, water-soluble primer containing aggregates of graded particle size. It improves adhesion on smooth or non-absorbent surfaces and adjusts substrate roughness, making it easier to apply subsequent coats. Suitable for indoor and outdoor use on stone and other surfaces.
Apply one coat using a roller, brush or paintbrush. Before use, dilute with up to 10% water and mix with a low-speed drill. Allow 4 hours before applying the next coat. Clean tools immediately with warm water and soap or detergent solution.
- Type: Adhesion primer
- Suitable substrate: Stone
- Composition: Acrylic, quartz-based
- Aggregates: Graded particle size
- Properties: Water-soluble, alkali-resistant
- Use: Interior and exterior
- Colour: Grey
- Dilution: Up to 10% with water
- Coverage: 0.1–0.15 kg/m²
- Surface drying time: Approximately 1 hour at 25 °C and 50% relative humidity
- Time before applying the next coat: 4 hours
- Density: 1.30 g/mL (±0.04)
- Solids by weight: 49% (±3)
- Viscosity: 105 KU (±10), ASTM D 562-05
- pH: 9.0 (±0.5)
- Maximum VOC content: 29 g/L
- Weight: 12 kg
- Product Number
- JK34110000122
Specifications
- Genre
- Primer
- Surface Material
- Stone
- Surfaces
- Multiprimer
- Properties
- Quartz, Acrylic, Adhesion, Water
Quantity
- Weight
- 12 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.