Kraft Arterra Patiti Quartz Primer is an acrylic quartz bonding primer designed for stone and other smooth or non-absorbent surfaces. It contains aggregates with graded particle sizes, regulates the substrate’s roughness and facilitates the application of subsequent decorative coating layers. It is alkali-resistant, and its aggregate size does not affect the appearance of subsequent layers, even when they are thin.
Apply one coat with a roller, brush or paintbrush after mixing with a low-speed drill. It can be diluted with up to 10% water and requires at least 4 hours before subsequent layers are applied, depending on weather conditions. The substrate must be clean, stable and sound, with a moisture content below 4%. Clean tools immediately with warm water and soap or detergent solution.
- Type: Bonding primer
- Formulation: Acrylic quartz
- Substrate: Stone
- Surfaces: Interior and exterior
- Suitable surfaces: Tiles, marble, stone, mosaics, painted walls and existing stamped concrete finishes
- Features: Aggregates with graded particle sizes, regulates substrate roughness, alkali-resistant
- Dilution: 0–10% with water
- Coverage: 0.1–0.15 kg/m²
- Surface dry: Approximately 1 hour at 25°C and 50% relative humidity
- Time before applying next coat: 4 hours
- Density: 1.30 g/mL (±0.04)
- Solids by weight: 49% (±3)
- Viscosity: 105 KU (±10), ASTM D 562-05
- pH: 9.0 (±0.5)
- Maximum VOC content: 29 g/L
- Colour: Grey
- Weight: 1 kg
- Product Number
- JK34110000110
Specifications
- Genre
- Primer
- Surface Material
- Stone
- Surfaces
- Multiprimer
- Properties
- Quartz, Acrylic, Adhesion, Water
Quantity
- Weight
- 1 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.