Putty Fillers

Isomat Acrylic Water-Based Concrete Putty White 7.75lt 25kg

Isomat STUCCO-COVER cement putty is acrylic, white and in powder form. It smooths concrete, exposed concrete and plaster surfaces, covering imperfections before painting or applying another coating....

Isomat STUCCO-COVER cement putty is acrylic, white and in powder form. It smooths concrete, exposed concrete and plaster surfaces, covering imperfections before painting or applying another coating. Suitable for indoor and outdoor use, it can be applied to a uniform thickness of up to 2 mm and locally to cover imperfections up to 3 mm.

The acrylic...

See Description & Specifications See Description & Specifications
25 90 €
Delivery Wed, 25 Nov - Tue, 01 Dec
89,00 €   shipping cost
Sent from Greece
From mollaoglou.gr
Greece
10 pieces
See Construction Materials on the page of mollaoglou.gr

Learn more about invoicing

Description & Specifications

Isomat STUCCO-COVER cement putty is acrylic, white and in powder form. It smooths concrete, exposed concrete and plaster surfaces, covering imperfections before painting or applying another coating. Suitable for indoor and outdoor use, it can be applied to a uniform thickness of up to 2 mm and locally to cover imperfections up to 3 mm.

The acrylic enhancement makes it easier to spread and sand, while its particle size allows application with a trowel or spraying machine. Apply in one or two coats, with the second coat applied after the first has set, following a wait of 4–6 hours. Final sanding can be done by hand or with a sander after approximately 12 hours.

  • Type: Cement-based smoothing putty
  • Form: Powder
  • Properties: Acrylic, water-based
  • Colour: White
  • Suitable surfaces: Concrete, exposed concrete and plaster
  • Suitable areas: Indoor and outdoor
  • Maximum application thickness: 2 mm uniformly, 3 mm locally
  • Application: With a trowel or spraying machine, in one or two coats
  • Waiting time between coats: 4–6 hours
  • Time before sanding: Approximately 12 hours
  • Sanding method: By hand or with a sander
  • Consumption: Approximately 1.2 kg/m² per mm of coat thickness
  • Water requirement: 7.75 l per 25 kg bag
  • Pot life: 4 h at +20°C
  • Application temperature: From +5°C to +30°C
  • Bulk density of dry mortar: 1.25 ± 0.10 kg/l
  • Bulk density of wet mortar: 1.60 ± 0.10 kg/l
  • Compressive strength: ≥ 6.0 N/mm²
  • Flexural strength: ≥ 2.0 N/mm²
  • Adhesion: ≥ 1.0 MPa
  • Capillary water absorption: ≤ 0.2 kg/m² min^0.5
  • Reaction to fire: A1
  • Standard: EN 998-1, GP CS IV, W2
  • Weight: 25 kg
  • Capacity: 7.75 l

Manufacturer

Dimensions

Type
Concrete Based Putty
Attributes
Acrylic, Water
Colour
White
Type
Powder
Application Surface
Wall / Plaster
Sanding Capability
Yes
No Shrinkage / Crack Resistance
No

Quantity

Capacity
7750 ml
Weight
25 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

25,90 €
89,00 €   shipping cost