Putty Fillers

Isomat Multifill Water-Based Tile Joint Filler Chestnut 4.25lt 25kg

Isomat Multifill grout is a resin-modified cement-based powder mortar, suitable for laying and grouting natural or artificial stone on walls and floors, indoors and outdoors. It is suitable for joints...

Isomat Multifill grout is a resin-modified cement-based powder mortar, suitable for laying and grouting natural or artificial stone on walls and floors, indoors and outdoors. It is suitable for joints 5–40 mm wide and has a grain size of up to 1.3 mm. It is an M15 masonry mortar according to EN 998-2 and a CG2 WA grout according to EN 13888, with CE marking....

See Description & Specifications See Description & Specifications
27 90 €
Delivery Wed, 25 Nov - Tue, 01 Dec
89,00 €   shipping cost
Sent from Greece
From mollaoglou.gr
Greece
10 pieces
See Construction Materials on the page of mollaoglou.gr

Learn more about invoicing

Description & Specifications

Isomat Multifill grout is a resin-modified cement-based powder mortar, suitable for laying and grouting natural or artificial stone on walls and floors, indoors and outdoors. It is suitable for joints 5–40 mm wide and has a grain size of up to 1.3 mm. It is an M15 masonry mortar according to EN 998-2 and a CG2 WA grout according to EN 13888, with CE marking.

It offers water repellency and colour stability. Its pot life is at least 4.5 hours at +20°C. To prepare, add 4.25 l of water per 25 kg bag; after mixing, leave to mature for approximately 5 minutes, then mix again. Apply with a trowel and, where necessary, fill the joint using a narrow metal spatula. Remove excess material with a slightly damp sponge.

  • Type: Resin-modified cement grout
  • Form: Powder
  • Colour: Chestnut
  • Weight: 25 kg
  • Joint width: 5–40 mm
  • Grain size: Up to 1.3 mm
  • Pot life: At least 4.5 hours at +20°C
  • Mixing water: 4.25 l per 25 kg bag
  • Masonry mortar class: M15 according to EN 998-2
  • Grout type: CG2 WA according to EN 13888
  • Marking: CE
  • Application temperature: +5°C to +35°C
  • Operating temperature: -30°C to +90°C
  • Compressive strength after 28 days: ≥ 15.00 N/mm²
  • Flexural strength after 28 days: ≥ 6.00 N/mm²
  • Properties: Water repellency, colour stability
  • Suitable surfaces: Natural or artificial stone on walls and floors

Manufacturer

Dimensions

Type
Tile Joint Filler
Attributes
Water
Colour
Grey
Type
Powder
Application Surface
Plasterboard
Sanding Capability
No
No Shrinkage / Crack Resistance
No

Quantity

Capacity
4250 ml
Weight
25 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

27,90 €
89,00 €   shipping cost