Putty Fillers

Isomat Stuccocret-plus Resin-Based / Acrylic / Water-Based White Tile Joint Filler 8.8lt 20kg

Isomat Stuccocret-plus resin-based skim coat smooths plaster, concrete, and plasterboard surfaces before painting. When mixed with water, it forms a paste that spreads easily without clumping, while...

Isomat Stuccocret-plus resin-based skim coat smooths plaster, concrete, and plasterboard surfaces before painting. When mixed with water, it forms a paste that spreads easily without clumping, while the finished surface is easy to sand and ready for painting.

Apply with a spatula in two coats, with a maximum thickness of 1 mm per coat. Apply the second coat...

See Description & Specifications See Description & Specifications
19 90 €
Delivery Wed, 25 Nov - Tue, 01 Dec
71,00 €   shipping cost
Sent from Greece
From mollaoglou.gr
Greece
10 pieces
See Construction Materials on the page of mollaoglou.gr

Learn more about invoicing

Description & Specifications

Isomat Stuccocret-plus resin-based skim coat smooths plaster, concrete, and plasterboard surfaces before painting. When mixed with water, it forms a paste that spreads easily without clumping, while the finished surface is easy to sand and ready for painting.

Apply with a spatula in two coats, with a maximum thickness of 1 mm per coat. Apply the second coat once the first has set, after 2–3 hours. Sanding and painting can be carried out after approximately 12 hours. When using on plasterboard, prime the surface with FLEX-PRIMER acrylic primer.

  • Type: Resin-based skim coat
  • Form: Powder
  • Colour: White
  • Weight: 20 kg
  • Water requirement: 8.8 l per 20 kg bag
  • Suitable surfaces: Plaster, concrete, and plasterboard
  • Application: Interior use
  • Number of coats: 2
  • Maximum thickness per coat: 1 mm
  • Waiting time between coats: 2–3 hours
  • Time before sanding and painting: Approximately 12 hours
  • Consumption: Approximately 0.9 kg/m² per mm of coat thickness
  • Pot life: 6.5 hours at +20 °C
  • Additional properties: Extra-fine, acrylic, and water-soluble
  • Mortar type: GP CS II, W0 according to EN 998-1
  • Bulk density of dry mortar: 1.00 ± 0.1 kg/l
  • Bulk density of fresh mortar: 1.25 ± 0.1 kg/l
  • Bulk density of hardened mortar: 0.90 ± 0.1 kg/l
  • Compressive strength: 2.50 ± 0.5 N/mm²
  • Flexural strength: 1.20 ± 0.2 N/mm²
  • 28-day adhesion: ≥ 0.5 N/mm²
  • Capillary water absorption: ≤ 1.5 kg/m² min^0.5
  • Thermal conductivity (λ10,dry): 0.24 W/(m·K) at P = 50%
  • Water vapour diffusion coefficient (μ): ≤ 21
  • Environmental declaration: EPD, registration number EPD-IES-0006173

Manufacturer

Dimensions

Type
Tile Joint Filler
Attributes
Resinous, Acrylic, Water
Colour
White
Type
Powder
Application Surface
Plasterboard
Sanding Capability
Yes
No Shrinkage / Crack Resistance
No

Quantity

Capacity
8800 ml
Weight
20 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

19,90 €
71,00 €   shipping cost