Kraft FixoTile Ultra 20 tile adhesive is a white, resin-modified cementitious adhesive, classified as C2TE according to EN 12004. It is suitable for absorbent and non-absorbent tiles, including granite, natural stone, porcelain stoneware, clinker and ceramic tiles, on interior or exterior floors and walls. It offers zero slip, an open time of 30 minutes and can be applied in layers up to 10 mm thick.
Vinyl copolymer resins contribute to adhesion and moisture resistance on common substrates. The adhesive is compatible with plasterboard and cement board, and suitable for bathrooms and areas with high humidity when applied to concrete, cement screed or plaster. It is EMICODE EC1PLUS certified for very low volatile emissions.
- Type: Tile adhesive
- Quantity: 5 kg
- Colour: White
- Classification: C2TE according to EN 12004
- Use: Interior and exterior
- Suitable for: Absorbent and non-absorbent tiles
- Substrates: Common substrates, plasterboard and cement board
- Slip: ≤ 0.5 mm
- Open time: 30 minutes
- Adjustment time: 30 minutes
- Pot life: 4 hours
- Application thickness: Up to 10 mm
- Mixing ratio: 1.5–1.6 litres of water per 5 kg
- Maximum grain size: 600 μm
- Dry mortar density: 1.33 ± 0.05 kg/litre
- Wet mix density: 1.85 ± 0.05 kg/litre
- Application temperature: From +5°C to +35°C
- Wall grouting: After 4–8 hours
- Floor grouting: After 24 hours
- Ready for light traffic: After 24 hours
- Time to full use: After 14 days
- Consumption: 3–5 kg/m²
- Initial tensile adhesion strength after 28 days: ≥ 1.50 N/mm²
- Tensile adhesion strength after 30-minute open time: ≥ 0.50 N/mm²
- Reaction to fire: Euroclass A1
- Certification: EMICODE EC1PLUS
- Type
- Tiles
- Quantity
- 5 kg
- Colour
- White
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.