Kraft Joint acrylic wood sealant seals joints and cracks on interior and exterior surfaces made of cement, brick, wood, aluminium and PVC. It is suitable for absorbent and porous surfaces, such as window and door frames, and seals vertical joints and seams with width movement of up to 8%. Once fully cured, it can be painted with standard acrylic and plastic paints.
The material does not shrink and can be sanded. It becomes touch-dry in 10–15 minutes and fully cures in 4–5 days. Apply with a manual or pneumatic caulking gun. Clean tools and residue immediately with warm water. Not suitable for continuous contact with water.
- Type: One-component acrylic sealant
- Colour: White
- Packaging: Cartridge
- Volume: 600 ml
- Suitable surfaces: Cement, brick, wood, aluminium and PVC
- Joint width movement: Up to 8%
- Skin formation time: 10–15 minutes
- Full curing time: 4–5 days
- Curing rate: 2.0 mm/day
- Density: 1.67 g/cm³
- Hardness: Shore A 30
- Stress at 100% elongation: 0.3 N/mm²
- Elongation at break: 400%
- Temperature resistance: −20 °C to +70 °C
- Certification: EN 15651
- Thinning: Not required
- Application: Apply to dry, clean surfaces at an ambient temperature of 10 °C to 35 °C
Dimensions
- Type
- Mastic
- Packaging
- Cartridge
- Colour
- White
Attributes
- Adhesive
- No
- Mold Resistant
- No
- for Wood
- Yes
- High Temperature
- No
- Aquarium
- No
- Acrylic
- Yes
- Polyurethane
- No
Quantity
- Mass Gaining
- 600 ml
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.