Isomat EPOMAX-CMT resin mortar is a three-component, solvent-free product based on cement and water-based epoxy resins. It is used to repair, level and smooth concrete walls and floors before applying epoxy or polyurethane coatings, resilient flooring, carpets or wooden parquet. It is classified as a PCC R4 concrete repair mortar in accordance with EN 1504-3 and is CE-certified as a concrete surface protection product in accordance with EN 1504-2.
It can be used as a final coat up to 3 mm thick to protect against mechanical stress in corrosive environments, and as an underlay at least 2 mm thick on relatively fresh concrete before applying epoxy coatings. Apply with a trowel or spatula without adding water. After application, protect the surface from moisture for at least 24 hours.
- Weight: 25 kg
- Components: A+B two-component epoxy resin and C cementitious powder
- Colour: Grey
- Mixing ratio A:B:C: 1.0:2.6:16.0 by weight
- Apparent density: 2.0 ± 0.1 kg/l
- Pot life: Approximately 40 minutes at +20°C
- Minimum curing temperature: +8°C
- Maximum application thickness: 3 mm
- Walkability: After 15 hours at +23°C
- Overcoating time: After 48 hours at +23°C
- Time to reach final strengths: After 28 days at +23°C
- Compressive strength: ≥ 45.0 N/mm²
- Flexural strength: ≥ 8.0 N/mm²
- Adhesion (EN 1542): ≥ 3.0 N/mm²
- Modulus of elasticity: 21.2 GPa
- Chloride content: 0.00%
- Consumption: Approximately 2 kg/m²/mm of layer thickness
- Tool cleaning: With water immediately after use; hardened material can only be removed mechanically
- Weight
- 25 kg
- Pressed Cement Mortar
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.