Dulux Trade Weathershield Smooth Masonry Paint is a plastic acrylic emulsion paint suitable for exterior walls made of plaster, concrete, roughcast and brick. It forms an elastic film with high breathability and a fungicide that inhibits mould growth on the film. It is resistant to rain 30 minutes after application, as well as to mild atmospheric pollutants and salts from fresh mortar.
Apply with a brush, roller or conventional or airless spray gun. The surface must be sound, clean and dry. Wash painted surfaces with detergent, rinse and scrape away any loose paint. Clean mould, algae, lichen and moss with a suitable fungicidal solution. Fill minor damage with filler and larger holes with a sand-and-cement mortar.
- Type: Acrylic emulsion paint
- Use: Exterior
- Colour: Beige
- Quantity: 9 L
- Finish: Matt
- Suitable surfaces: Plaster, concrete, roughcast and brick
- Coverage on smooth surfaces: 12 m²/L
- Coverage on rough surfaces: 4–6 m²/L
- Touch dry: 30 minutes
- Recoating time: 2–4 hours
- Dilution: With water, up to 1:10; up to 1:5 for the first coat on bare surfaces
- Number of coats: 2 full coats, or 1 coat on painted surfaces in good condition and a similar colour
- Application temperature: At least 7 °C
- Relative humidity during application: Up to 80%
- Certification: BBA 97/3383
- Usage
- Exterior
- Quantity
- 9 lt
- Features
- Acrilyc, Watercolor
- Colour
- Beige
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.