Kraft CLIMATOP FLEXOSIL decorative paint is a silicone-based, elastomeric, water-repellent paste finish. It is used on interior and exterior masonry and as a finishing coat in the CLIMAWALL external thermal insulation system. It offers flexibility, weather resistance, water repellency and breathability, while retaining its colour stability.
Apply to dry, clean surfaces free of dust, oils, salts, rust and flaking paint. On porous, new or previously painted surfaces and cement-based substrates, first apply one coat of ClimaTop Primer. Do not dilute with water; mix before use with a low-speed mixer. Apply one coat with a stainless-steel trowel, 24 hours after priming, then create the texture by rubbing with a plastic trowel. Fresh concrete, fillers, plasters and gypsum products must dry for at least 4 weeks before application. Clean tools immediately with warm water and soap or a detergent solution.
- Type: Decorative finishing coat
- Composition: Silicone-based, elastomeric
- Form: Paste
- Colour: Clear
- Use: Interior and exterior
- Application: Masonry and the CLIMAWALL external thermal insulation system
- Properties: Water repellency, breathability, flexibility and weather resistance
- Colour stability: High
- Reaction to fire: A2-s1,d0 (EN 13501-1)
- Coverage: 1.4–3.7 kg/m²
- Drying time: 1–2 hours
- Grain sizes: FINE (0.6 mm), K08 (0.8 mm), K10 (1.0 mm), K15 (1.5 mm), K20 (2.0 mm), R15 (1.5 mm)
- Weight: 25 kg
Specifications
- Type
- Deco Paint
- Colour
- Transparent
- Acrilyc
- No
Quantity
- Weight
- 25 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.