Fire Alarms

MalTec 12-Zone Carbon Monoxide Detector CO

The MalTec SafeSensor5000 detector detects carbon monoxide and smoke from fire using an electrochemical CO sensor and a photoelectric smoke sensor. The LCD displays the CO concentration in ppm and the...

The MalTec SafeSensor5000 detector detects carbon monoxide and smoke from fire using an electrochemical CO sensor and a photoelectric smoke sensor. The LCD displays the CO concentration in ppm and the smoke level in dB/m. In the event of an alarm, it activates an 85 dB audible alert and a red LED indicator.

Three LED indicators show normal operation, an...

See full description See full description
The product is not available for shipping to the selected country.

Description

Description

The MalTec SafeSensor5000 detector detects carbon monoxide and smoke from fire using an electrochemical CO sensor and a photoelectric smoke sensor. The LCD displays the CO concentration in ppm and the smoke level in dB/m. In the event of an alarm, it activates an 85 dB audible alert and a red LED indicator.

Three LED indicators show normal operation, an alarm or fault, and low battery. The detector is powered by a built-in, non-replaceable CR123A lithium battery and features a test and silence button. It can be mounted on a ceiling or wall in an area of up to 40 m².

  • Detection type: Carbon monoxide and fire smoke
  • Sensors: Electrochemical CO sensor and photoelectric smoke sensor
  • Zones: 12
  • CO detection thresholds: 50, 100, and 300 ppm
  • CO alarm activation times: 60–90 minutes at 50 ppm, 10–40 minutes at 100 ppm, and up to 3 minutes at 300 ppm
  • Smoke detection sensitivity: 0.3 dB/m
  • Alarm: 85 dB audible alarm at 3 m and red LED visual alarm
  • LED indicators: Green for normal operation, red for an alarm, and yellow for a fault or low battery
  • Display: LCD
  • Power supply: Built-in, non-replaceable CR123A lithium battery, 3 V DC
  • Sensor lifespan: Up to 10 years
  • Maximum detection area: 40 m²
  • Mounting: Ceiling or wall
  • Device type: B
  • Standby current: 50 μA
  • Alarm current: 90 mA
  • Operating conditions: -10 °C to +55 °C, 95% humidity, and 86–106 kPa pressure
  • Standards: EN14604:2005/AC:2008 and EN50291-1:2018
  • Detector dimensions: Ø 105 × 40 mm
  • Weight: 200 g
  • Package contents: Detector, mounting base, screws, wall plugs, and user manual in Polish

Manufacturer

See full description

Specifications

Specifications

Type
Carbon Monoxide Detector
Thread
No
Autonomous
No
Zones Number
12

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The MalTec SafeSensor5000 detector detects carbon monoxide and smoke from fire using an electrochemical CO sensor and a photoelectric smoke sensor. The LCD displays the CO concentration in ppm and the smoke level in dB/m. In the event of an alarm, it activates an 85 dB audible alert and a red LED indicator.

Three LED indicators show normal operation, an alarm or fault, and low battery. The detector is powered by a built-in, non-replaceable CR123A lithium battery and features a test and silence button. It can be mounted on a ceiling or wall in an area of up to 40 m².

  • Detection type: Carbon monoxide and fire smoke
  • Sensors: Electrochemical CO sensor and photoelectric smoke sensor
  • Zones: 12
  • CO detection thresholds: 50, 100, and 300 ppm
  • CO alarm activation times: 60–90 minutes at 50 ppm, 10–40 minutes at 100 ppm, and up to 3 minutes at 300 ppm
  • Smoke detection sensitivity: 0.3 dB/m
  • Alarm: 85 dB audible alarm at 3 m and red LED visual alarm
  • LED indicators: Green for normal operation, red for an alarm, and yellow for a fault or low battery
  • Display: LCD
  • Power supply: Built-in, non-replaceable CR123A lithium battery, 3 V DC
  • Sensor lifespan: Up to 10 years
  • Maximum detection area: 40 m²
  • Mounting: Ceiling or wall
  • Device type: B
  • Standby current: 50 μA
  • Alarm current: 90 mA
  • Operating conditions: -10 °C to +55 °C, 95% humidity, and 86–106 kPa pressure
  • Standards: EN14604:2005/AC:2008 and EN50291-1:2018
  • Detector dimensions: Ø 105 × 40 mm
  • Weight: 200 g
  • Package contents: Detector, mounting base, screws, wall plugs, and user manual in Polish

Manufacturer

Type
Carbon Monoxide Detector
Thread
No
Autonomous
No
Zones Number
12

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.