The Raspberry Pi Pico 2 H microcontroller board is based on the RP2350 and features either two Arm Cortex-M33 cores or two Hazard3 cores, with a choice of the RISC-V architecture. It is software- and hardware-compatible with the Raspberry Pi Pico and can be programmed in C/C++ or Python.
It supports programming by dragging and dropping files over USB, and its pins are pre-soldered for direct installation on compatible boards. The RP2350 has documented security features, including protected OTP memory, secure boot ROM and SHA-256 acceleration.
- Type: Microcontroller board
- Microcontroller: RP2350
- Processors: 2 Arm Cortex-M33 cores or 2 Hazard3 cores
- Core frequency: 150 MHz
- SRAM: 520 kB
- UART ports: 2
- SPI ports: 2
- I²C ports: 2
- PWM channels: 24
- ADC channels: 4
- USB controller: USB 1.1 with host and device support
- PIO state machines: 12
- Power supply: Via USB
- Input voltage: 1.8–5.5 V DC
- Operating temperature: −20 to +85 °C
- Programming: C/C++, MicroPython
- Pins: Pre-soldered
- Height: 3.9 mm
- Length: 51.3 mm
- Width: 21 mm