94
90
€
Delivery
by Tue, 17 Nov
71,00 €
shipping cost
Sent from Greece
From
mollaoglou.gr
Description
Specifications
Isomat Isocure admixture is a water-based, paraffin-based solution that protects fresh concrete from rapid evaporation of the mixing water. It reduces shrinkage during setting and the likelihood of hairline cracks, particularly on large exposed concrete surfaces such as industrial floors, parking areas and concrete slabs. It also limits surface dust formation after setting and increases frost resistance.
It can be used as a separating layer to prevent adhesion between old and new concrete. After thorough mixing, apply an even, thin coat by spraying or rolling. On freshly placed concrete, apply after the surface water has evaporated, within 30–120 minutes. On formwork concrete, apply immediately after removing the formwork. If other coatings are to be applied, remove it by water jetting.
- Form: Water-based, paraffin-based solution
- Colour: White
- pH: 8.5 ± 1.0
- Density: 1.00 ± 0.05 kg/l
- Viscosity: 30–50 mPa.s at +23°C
- Consumption as an evaporation-control treatment: 150–200 g/m², depending on application conditions
- Consumption as a separating layer: 0.5–1.0 kg/m², depending on the substrate’s absorbency
- Standard: ASTM C309-19, Type 1, Class A
- Quantity: 20 kg
- Shelf life: 12 months from the date of manufacture, in the original sealed packaging
- Storage temperature: +5°C to +35°C
- Storage conditions: In the original sealed packaging, away from direct sunlight and frost
Dimensions
- Emulsion
- No
Properties
- Waterproofer
- No
- Plasticizer
- No
- Antifreeze
- No
- Set Retarder
- No
Weight
- Grams
- 20000 gr
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.