Isomat Multifill-diamond 1-12 grout fills joints 1–12 mm wide in tiles and natural stone. It contains resins, sets quickly and is Portland cement-free, helping ensure an even colour without salt stains or colour variations.
It is water-repellent with a “drop effect” and contains bacteriostatic ingredients that prevent bacteria from growing in the joints. Suitable for indoor and outdoor use, including kitchens, bathrooms, balconies and swimming pools. Before application, clean the joints and dampen them with a wet sponge. Spread the product diagonally using a rubber float, then remove any excess with a damp sponge.
- Type: Grout
- Colour: Dark brown
- Weight: 4 kg
- Joint width: 1–12 mm
- Composition: Resin-based, Portland cement-free
- Standard: CG2 WA, EN 13888
- Setting: Fast-setting
- Water repellency: Very high
- Shrinkage: No shrinkage
- Pot life: At least 50 min at +20°C
- Compressive strength: 25.00 N/mm² after 28 days
- Flexural strength: 7.00 N/mm² after 28 days
- Consumption: 0.2–2.0 kg/m²
- Application temperature: +5°C to +35°C
Dimensions
- Type
- Tile Joint Filler
- Attributes
- Water
- Colour
- Brown
- Type
- Liquid
- Application Surface
- Plasterboard
- Sanding Capability
- No
- No Shrinkage / Crack Resistance
- Yes
Quantity
- Weight
- 4 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.