Putty Fillers

Isomat Multifill-Diamond 1-12 Mm Tile Joint Filler 4 Kg Chestnut

Isomat Multifill-diamond 1-12 is a coloured, resin-enhanced, fast-setting grout for joints 1–12 mm wide in tiles and natural stone. It contains no Portland cement, helping to ensure a uniform colour...

Isomat Multifill-diamond 1-12 is a coloured, resin-enhanced, fast-setting grout for joints 1–12 mm wide in tiles and natural stone. It contains no Portland cement, helping to ensure a uniform colour without salt stains or variations in shade. Its formulation is water-repellent and contains bacteriostatic ingredients that inhibit bacterial growth in the...

See Description & Specifications See Description & Specifications
19 90 €
Delivery Wed, 25 Nov - Tue, 01 Dec
14,00 €   shipping cost
Sent from Greece
From mollaoglou.gr
Greece
10 pieces
See Construction Materials on the page of mollaoglou.gr

Learn more about invoicing

Description & Specifications

Isomat Multifill-diamond 1-12 is a coloured, resin-enhanced, fast-setting grout for joints 1–12 mm wide in tiles and natural stone. It contains no Portland cement, helping to ensure a uniform colour without salt stains or variations in shade. Its formulation is water-repellent and contains bacteriostatic ingredients that inhibit bacterial growth in the joints.

Suitable for indoor and outdoor areas, including kitchens, bathrooms, balconies and swimming pools. Joints must be clean and damp before application. Mix with water using a low-speed drill, leave to mature for approximately 3 minutes, then mix again. Apply diagonally with a rubber float and remove excess with a damp sponge.

  • Type: Grout
  • Weight: 4 kg
  • Colour: Brown
  • Joint width: 1–12 mm
  • Standard: CG2 WA, EN 13888
  • Water repellency: High
  • Shrinkage: Non-shrinking
  • Pot life: At least 50 min at +20°C
  • Strength development time: Within 24 hours
  • Compressive strength: 25 N/mm² after 28 days
  • Flexural strength: 7 N/mm² after 28 days
  • Consumption: 0.2–2 kg/m²
  • Mixing water: 0.90–1.00 l per 4 kg pack
  • Application temperature: +5°C to +35°C

Manufacturer

Dimensions

Type
Tile Joint Filler
Attributes
Water
Colour
Beige
Type
Liquid
Application Surface
Plasterboard
Sanding Capability
No
No Shrinkage / Crack Resistance
Yes

Quantity

Weight
4 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

19,90 €
14,00 €   shipping cost