Isomat Multifill-Diamond 1-12 is a coloured resin-based grout for joints 1–12 mm wide in tiles and natural stone. It sets quickly and contains no Portland cement, helping to ensure a uniform colour without salt stains or colour variations. Its formulation includes bacteriostatic ingredients that prevent bacteria from growing in the joints.
Suitable for indoor and outdoor use, including kitchens, bathrooms, balconies and swimming pools. Clean and dampen the joints before application. Mix the grout with water and spread it diagonally using a rubber float. Apply at temperatures between +5 °C and +35 °C.
- Type: Coloured resin-based grout
- Colour: Black
- Weight: 4 kg
- Joint width: 1–12 mm
- Standard: CG2 WA, EN 13888
- Setting: Fast-setting
- Water repellency: Very high, with a droplet effect
- Shrinkage resistance: Does not shrink
- Strength development: Within 24 hours
- Pot life: At least 50 min at +20 °C
- Mixing water: 0.90–1.00 l per 4 kg bag
- Maturation time: Approximately 3 min
- Compressive strength: 25 N/mm² after 28 days
- Flexural strength: 7 N/mm² after 28 days
- Consumption: 0.2–2.0 kg/m²
- Application: Indoor and outdoor use
- Application temperature: +5 °C to +35 °C
Dimensions
- Type
- Tile Joint Filler
- Attributes
- Water
- Colour
- Black
- Type
- Liquid
- Application Surface
- Plasterboard
- Sanding Capability
- No
- No Shrinkage / Crack Resistance
- Yes
Quantity
- Weight
- 4 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.