Isomat Multifill-Diamond 1-12 is a coloured, resin-based grout for 1–12 mm joints in tiles and natural stone. It sets quickly and contains no Portland cement, ensuring a uniform colour without salt stains or colour variations. Its non-shrinking formula includes bacteriostatic ingredients that inhibit bacterial growth in the joints.
Suitable for indoor and outdoor use, including kitchens, bathrooms, balconies and swimming pools. Mix with water using a low-speed drill, leave to mature for approximately 3 minutes, then mix again. Apply diagonally with a rubber float and remove excess with a damp sponge.
- Type: Grout
- Weight: 4 kg
- Colour: Grey beige
- Joint width: 1–12 mm
- Composition: Resin-based, without Portland cement
- Standard: CG2 WA, EN 13888
- Water repellency: Very high, with a droplet effect
- Shrinkage: Does not shrink
- Compressive strength after 28 days: 25 N/mm²
- Flexural strength after 28 days: 7 N/mm²
- Consumption: 0.2–2 kg/m²
- Mixing water: 0.9–1 l per 4 kg bag
- Pot life: At least 50 minutes at +20°C
- Application temperature: From +5°C to +35°C
- Maturation time: Approximately 3 minutes
Dimensions
- Type
- Tile Joint Filler
- Attributes
- Water
- Colour
- Grey
- Type
- Liquid
- Application Surface
- Plasterboard
- Sanding Capability
- No
- No Shrinkage / Crack Resistance
- Yes
Quantity
- Weight
- 4 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.