Isomat Multifill-diamond 1-12 grout is suitable for joints 1–12 mm wide in tiles and natural stone. It sets quickly and contains no Portland cement, helping to ensure a uniform colour without salt stains or uneven colouring. Its water-repellent properties create a beading effect, while its bacteriostatic ingredients prevent bacteria from growing in the joints.
Suitable for indoor and outdoor areas, including kitchens, bathrooms, balconies and swimming pools. It develops its strength within 24 hours and does not shrink. Before application, clean the joints and dampen them with a wet sponge. Mix the product with water using a low-speed drill, leave it to mature for approximately 3 minutes, then mix again. Apply diagonally with a rubber grout float and remove any excess with a damp sponge.
- Type: Grout
- Colour: White
- Weight: 4 kg
- Joint width: 1–12 mm
- Standard: CG2 WA, EN 13888
- Shrinkage: Does not shrink
- Pot life: At least 50 min at +20°C
- Application temperature: +5°C to +35°C
- Mixing water: 0.90–1.00 l per 4 kg package
- Compressive strength after 28 days: 25 N/mm²
- Flexural strength after 28 days: 7 N/mm²
- Consumption: 0.2–2.0 kg/m²
Dimensions
- Type
- Tile Joint Filler
- Attributes
- Water
- Colour
- White
- Type
- Liquid
- Application Surface
- Plasterboard
- Sanding Capability
- No
- No Shrinkage / Crack Resistance
- Yes
Quantity
- Weight
- 4 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.