Isomat Multifill-Diamond 1-12 is a coloured, resin-based, fast-setting grout for joints 1–12 mm wide in tiles and natural stone. It contains no Portland cement, and its formulation helps ensure a uniform colour without salt stains or colour variations. It is water-repellent with a “drop effect” and contains bacteriostatic ingredients that prevent bacterial growth in the joints.
Suitable for indoor and outdoor use, including kitchens, bathrooms, balconies and swimming pools. Dampen the joints with a wet sponge before application. Mix the powder with water using a low-speed drill, leave it to mature for approximately 3 minutes, then mix again. Apply the grout diagonally with a rubber float and remove excess with a damp sponge.
- Type: Grout
- Form: Powder
- Colour: Blue grey
- Weight: 4 kg
- Joint width: 1–12 mm
- Standard: CG2 WA, EN 13888
- Shrinkage: No shrinkage
- Pot life: At least 50 min at +20°C
- Compressive strength: 25 N/mm² after 28 days
- Flexural strength: 7 N/mm² after 28 days
- Consumption: 0.2–2 kg/m²
- Application temperature: From +5°C to +35°C
- Mixing water: 0.90–1 l per 4 kg package
Dimensions
- Type
- Tile Joint Filler
- Attributes
- Water
- Colour
- Grey
- Type
- Liquid
- Application Surface
- Plasterboard
- Sanding Capability
- No
- No Shrinkage / Crack Resistance
- Yes
Quantity
- Weight
- 4 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.