Isomat Multifill-Diamond 1-12 is a resin-based coloured grout for joints 1–12 mm wide in tiles and natural stone. It sets quickly and contains no Portland cement, helping to ensure uniform colour without salt stains or colour variations. Suitable for indoor and outdoor use.
Its formula provides water repellency with a “drop effect” and contains bacteriostatic ingredients that prevent bacterial growth in the joints. It develops high strength within 24 hours and does not shrink. For application, the joints should be clean and dampened with a wet sponge. Mix the material with water, leave it to mature for approximately 3 minutes, then mix again. Apply diagonally with a rubber float and remove excess material with a damp sponge.
- Type: Grout
- Weight: 4 kg
- Colour: Dark grey
- Joint width: 1–12 mm
- Composition: Resin-based, Portland cement-free
- Standard: CG2 WA, EN 13888
- Setting time: Fast-setting
- Water repellency: Very high, with “drop effect”
- Shrinkage resistance: Does not shrink
- Bacteriostatic ingredients: Prevent bacterial growth in the joints
- Application areas: Indoor and outdoor areas, kitchens, bathrooms, balconies and swimming pools
- Mixing water: 0.90–1.00 l per 4 kg bag
- Pot life: At least 50 min at +20°C
- Compressive strength: 25 N/mm² after 28 days
- Flexural strength: 7 N/mm² after 28 days
- Consumption: 0.2–2.0 kg/m²
- Application temperature: +5°C to +35°C
- Available shades: Sand, Light grey, Light brown, Anemone, Silver grey, Beige grey, Blue grey, Grey, Cement grey, Caramel, Chestnut, Brown, Earth brown, White, Black, Bahamas beige, Dark grey, Dark brown
Dimensions
- Type
- Tile Joint Filler
- Attributes
- Water
- Colour
- Grey
- Type
- Liquid
- Application Surface
- Plasterboard
- Sanding Capability
- No
- No Shrinkage / Crack Resistance
- Yes
Quantity
- Weight
- 4 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.