Isomat Premium Color Base P matte plastic paint is intended for indoor use and can be applied to new or old concrete, plaster and plasterboard surfaces, as well as surfaces filled with acrylic or cement-based fillers. It offers high coverage, good workability and fast drying, and is almost odourless. The finished surface is matte, with a gloss level below 5 at 85°.
The paint has Class 1 wet scrub resistance according to EN ISO 11998 and strong adhesion to new or old substrates. It complies with EN 71-3 Category III, is certified Indoor Air Comfort GOLD and has an A+ rating for volatile organic compound emissions under French regulations. It has Environmental Product Declaration EPD-IES-0009671.
- Type: Vinyl
- Use: Indoor
- Application surfaces: Concrete, plaster, plasterboard, surfaces filled with acrylic or cement-based fillers
- Shade: Base P
- Volume: 1 lt
- Gloss: Matte, below 5 at 85°
- Volume solids: 44 ± 2%
- Dry film thickness: 32 ± 3 μm
- Wet film thickness: 72 ± 5 μm
- Viscosity: 115 ± 5 KU
- Density: 1.46 ± 0.03 kg/l
- pH: 8–9.5
- Adhesion strength: ≥ 2 N/mm²
- Drying time: Approximately 1 h to touch
- Recoating time: 3–4 h
- Water vapour permeability: Sd = 0.20 ± 0.04 m (V2 medium)
- Capillary water absorption: w = 0.04 ± 0.02 kg/m²h^0.5 (W3 low)
- Whiteness: ≥ 87%
- Coverage: Approximately 12 m²/lt per coat on suitably prepared surfaces
- VOC content: 12.6 g/l
- Application: With a roller, brush or airless spray gun, in two coats
- Thinning: Up to 5–10% with clean water
- Tool cleaning: With water immediately after use
- Shelf life: 24 months from production, in the original sealed packaging
- Storage temperature: +5°C to +35°C
- Pressed Cement Mortar
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.