eSun PLA-Luminous filament glows in the dark thanks to its phosphorescent components, which absorb energy from light and then emit it. Its glow is brightest after exposure to ultraviolet light. It is suitable for printing with most FDM 3D printers.
High dimensional stability and low warping help produce accurate prints with a smooth surface. Good layer adhesion and reduced stringing, air bubbles, and cracking help ensure smooth printing. The filament is wound onto the spool to reduce the risk of tangling and overlapping coils.
- Color: Glow-in-the-dark green
- Material: PLA-Luminous
- Diameter: 1.75 mm
- Weight: 1 kg
- Filament length: 340–350 m
- Packaging: Spool
- Printing temperature: 190–230 °C, recommended 215 °C
- Bed temperature: 45–60 °C
- Printing speed: 40–100 mm/s
- Fan speed: 100%
- Compatibility: Most FDM 3D printers
- Density: 1.2 g/cm³
- Tensile strength: 72 MPa
- Flexural strength: 90 MPa
- Flexural modulus: 1915 MPa
- Elongation at break: 11.8%
- IZOD impact strength: 5.4 kJ/m²
- Melt flow rate: 3.5 g/10 min (190 °C / 2.16 kg)
- Heat deflection temperature: 53 °C (0.45 MPa)
- Product Number
- PLA-LM175L-G1P1
- Material
- PLA
- Colour
- Green
- Diameter
- 1.75 mm
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- 1 pcs
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.