3D Printer Filament

Esun PLA 1.75mm 1.75mm 1kg coral 1kg (Spool) 3D Printer Filament Code: PLA-SKRB175O-CA1P1

eSUN PLA-Silk Rainbow PLA filament for FDM 3D printers creates prints with gradual color transitions and a silky, metallic sheen. The color changes approximately every 15–20 m, allowing you to print...

eSUN PLA-Silk Rainbow PLA filament for FDM 3D printers creates prints with gradual color transitions and a silky, metallic sheen. The color changes approximately every 15–20 m, allowing you to print multicolored objects from a single spool. PLA-Silk has a smooth surface and is easy to print, making it suitable for figures, sculptures, decorations, toys,...

See full description See full description

Top specs

  • Weight 1 kg
  • Diameter 1.75 mm
  • See all
27 11 €
Delivery Fri, 27 Nov - Thu, 03 Dec
14,00 €   shipping cost
Sent from Greece
From GrShop 4.6 (42)
Greece
20+ pieces
See Printer Supplies on the page of GrShop

Learn more about invoicing

Description

Description

eSUN PLA-Silk Rainbow PLA filament for FDM 3D printers creates prints with gradual color transitions and a silky, metallic sheen. The color changes approximately every 15–20 m, allowing you to print multicolored objects from a single spool. PLA-Silk has a smooth surface and is easy to print, making it suitable for figures, sculptures, decorations, toys, accessories, enclosures, and cosplay accessories.

The diameter tolerance is ±0.03 mm, ensuring consistent feeding and reducing the risk of nozzle clogs. Its 0.3–0.5% shrinkage helps reduce the likelihood of warping and cracking, while good layer adhesion contributes to the structural integrity of models. The filament is carefully wound, produces minimal stringing, and its support structures are easy to remove.

It is compatible with most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo, and Raise3D. For automatic feeding systems, we recommend checking compatibility with the dimensions of the non-removable spool.

  • Material: PLA
  • Type: PLA-Silk Rainbow
  • Color: Coral
  • Finish: Silky with a metallic sheen
  • Diameter: 1.75 mm
  • Diameter tolerance: ±0.03 mm
  • Weight: 1 kg
  • Filament packaging: Spool
  • Spool: Non-removable
  • Color change: Approximately every 15–20 m
  • Shrinkage: 0.3–0.5%
  • Density: 1.21 g/cm³
  • Melt flow rate: 4.5 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 56 °C (0.45 MPa)
  • Flexural strength (XY): 75.3 MPa
  • Flexural modulus (XY): 2023 MPa
  • Nozzle temperature: 210–230 °C
  • Heated bed temperature: 45–60 °C
  • Print speed: 40–300 mm/s
  • Fan speed: 100% (recommended)
  • Printing technology: FDM
  • Compatibility: Most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo, and Raise3D

Manufacturer

See full description

Specifications

Specifications

Product Number
PLA-SKRB175O-CA1P1
Material
PLA
Colour
Multicolour
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

eSUN PLA-Silk Rainbow PLA filament for FDM 3D printers creates prints with gradual color transitions and a silky, metallic sheen. The color changes approximately every 15–20 m, allowing you to print multicolored objects from a single spool. PLA-Silk has a smooth surface and is easy to print, making it suitable for figures, sculptures, decorations, toys, accessories, enclosures, and cosplay accessories.

The diameter tolerance is ±0.03 mm, ensuring consistent feeding and reducing the risk of nozzle clogs. Its 0.3–0.5% shrinkage helps reduce the likelihood of warping and cracking, while good layer adhesion contributes to the structural integrity of models. The filament is carefully wound, produces minimal stringing, and its support structures are easy to remove.

It is compatible with most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo, and Raise3D. For automatic feeding systems, we recommend checking compatibility with the dimensions of the non-removable spool.

  • Material: PLA
  • Type: PLA-Silk Rainbow
  • Color: Coral
  • Finish: Silky with a metallic sheen
  • Diameter: 1.75 mm
  • Diameter tolerance: ±0.03 mm
  • Weight: 1 kg
  • Filament packaging: Spool
  • Spool: Non-removable
  • Color change: Approximately every 15–20 m
  • Shrinkage: 0.3–0.5%
  • Density: 1.21 g/cm³
  • Melt flow rate: 4.5 g/10 min (190 °C / 2.16 kg)
  • Heat deflection temperature: 56 °C (0.45 MPa)
  • Flexural strength (XY): 75.3 MPa
  • Flexural modulus (XY): 2023 MPa
  • Nozzle temperature: 210–230 °C
  • Heated bed temperature: 45–60 °C
  • Print speed: 40–300 mm/s
  • Fan speed: 100% (recommended)
  • Printing technology: FDM
  • Compatibility: Most FDM printers, including models from Bambu Lab, Creality, Anycubic, Elegoo, and Raise3D

Manufacturer

Product Number
PLA-SKRB175O-CA1P1
Material
PLA
Colour
Multicolour
Diameter
1.75 mm
Weight
1 kg
Filament Packaging
Spool
Quantity
-

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

27,11 €
14,00 €   shipping cost