eSUN PLA 3D printing filament is suitable for decorative objects, figures, cosplay accessories, and prototypes. The color gradient from yellow to white and the matte finish create prints with a smooth surface and less visible light reflections.
Support structures are easy to remove. The filament is intended primarily for indoor use and is not resistant to UV radiation, acids, or alkalis. Its heat deflection temperature is 50.2 °C.
- Material: PLA
- Color: Yellow
- Finish: Matte
- Weight: 1 kg
- Filament diameter: 1.75 mm
- Packaging: Spool
- Density: 1.329 g/cm³
- Nozzle temperature: 210–230 °C
- Build plate temperature: 65 °C
- Build plate material: PEI
- Nozzle diameter: 0.4 mm
- Print speed: Below 300 mm/s
- Fan speed: 100%
- Drying: At 60 °C for more than 8 hours
- Heat deflection temperature: 50.2 °C (0.45 MPa)
- Tensile strength (X-Y): 39.81 MPa
- Tensile strength (Z): 16.23 MPa
- Elongation at break (X-Y): 5.75%
- Elongation at break (Z): 1.80%
- Flexural strength (X-Y): 65 MPa
- Flexural strength (Z): 26.6 MPa
- Applications: Decorations, cosplay, prototyping, and mechanical parts with appropriately selected specifications
- Product Number
- PLA-MTRB175S-YWAQ1P1
- Material
- PLA
- Colour
- Yellow
- Diameter
- 1.75 mm
- Weight
- 1 kg
- Filament Packaging
- Spool
- Quantity
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.