Skroutz.mt

Telwin Infinity 220 Welding Machine Inverter TIG / MMA with Maximum Welding Current 200A and Duty Cycle 35%
Welding Machines

Telwin Infinity 220 Welding Machine Inverter TIG / MMA with Maximum Welding Current 200A and Duty Cycle 35%

INFINITY 220 INVERTER Electrode MMA-TIG

Specifications

  • Weight: 6.5 kg
  • Frequency: 50-60 Hz
  • Voltage: 230 V
  • Protection Degree: IP21
  • Max Electrode Diameter: 4.0 mm
  • Power: 5.0 KVA
  • Welding Current: 15-200...

INFINITY 220 INVERTER Electrode MMA-TIG

Specifications

  • Weight: 6.5 kg
  • Frequency: 50-60 Hz
  • Voltage: 230 V
  • Protection Degree: IP21
  • Max Electrode Diameter: 4.0 mm
  • Power: 5.0 KVA
  • Welding Current: 15-200 A
  • Efficiency: 60% 200 A

Description

High reliability welding with 3rd generation electronic systems (IGBT). Reduced weight and dimensions, low power...

See full description See full description

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    5

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all

User Manual

Welding current (max)

  1. 150 A

    from 288,00 €

  2. 200 A

    from 463,79 €

465 00 €
Delivery by Wed, 24 Jun
23,00 €   shipping cost
Sent from Greece
From Emkate 4.9 (18)
4.9 (18 reviews)
Greece
10 pieces
See Tools on the page of Emkate
Product report

Description

Description

INFINITY 220 INVERTER Electrode MMA-TIG

Specifications

  • Weight: 6.5 kg
  • Frequency: 50-60 Hz
  • Voltage: 230 V
  • Protection Degree: IP21
  • Max Electrode Diameter: 4.0 mm
  • Power: 5.0 KVA
  • Welding Current: 15-200 A
  • Efficiency: 60% 200 A

Description

High reliability welding with 3rd generation electronic systems (IGBT). Reduced weight and dimensions, low power consumption (energy efficient). Smooth and easy arc starting with high stability, despite voltage fluctuations in the network. The Arc Force, Hot Start, Anti-Stick systems are now part of the basic equipment of the TELWIN family.

Arc Force: Automatic current calibration during welding. Hot Start: Prevents the flame from extinguishing when the electrode is in contact with the welding object. Anti-Stick: Prevents the electrode from sticking to the welding point. Thanks to the high quality of power production (Low Distortion Quality System), it has the ability to weld electrodes up to 4mm.

Thermostatic overvoltage-undervoltage protection, overcurrent protection, generator protection (± 15%). Ability to use the following types of electrodes: rutile, basic, stainless steel, cast iron, etc.

Complete with MMA welding accessories.

Includes:

  • Ground cable
  • Electrode holder cable

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Dimensions

Type
TIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
35 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
5 kVA

Power: 5


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
6600 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (12)

Reviews

5.0
12
5.0
Review this product
  1. 10
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • Power
  • Machine durability
  • Construction quality
  • Weight
  • Volume
  • Easy to use
  • Value for money
  • Welding cable length
  • Babis_Anastasioy
    5
    3 out of 4 members found this review helpful
    Babis_Anastasioy
    This review is about the welding current (max): 150 A

    Really good machine. I stuck with a 2.5 electrode and I was completely satisfied at 80A. I compared it to another electronic one I have and I can say that the machine is much more powerful. Its cables are close, but I don't think that's a problem. I also have alternatives from the other welding machine that fit and are far away. After all, these work with continuous current so we don't need excessively long cables, since continuous current doesn't go far. I recommend this welding machine.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • Avtwvhs_GR
    5
    4 out of 4 members found this review helpful
    Avtwvhs_GR
    This review is about the welding current (max): 150 A

    I bought it for amateur use, on sale for 169 euros from Leroy Merlin, replacing an old classic 150 kg (not Amper) electric welding machine... In the very first job, on a garage door, I encountered the issue that I had already read about regarding the short cables. They are really VERY short... However, that was the only negative aspect! And it can be easily fixed! My welds were truly PROFESSIONAL! Without being an expert. While with the old welding machine, it seemed like the work was not done by a professional. Very easy to use, very easy to transport, I don't know its capabilities on a professional level, but for anyone who is an amateur like me, it is an excellent choice.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • kaleonidas
    5
    1 out of 2 members found this review helpful
    kaleonidas
    This review is about the welding current (max): 150 A

    The welding is quite good even though it is my first one, but it is very easy to use and makes strong welds. I have been working with it for a while without it getting hot. The cable length is short but someone can change them

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • georginaki.91
    5
    1 out of 1 members found this review helpful
    georginaki.91
    This review is about the welding current (max): 150 A

    It is a very good and reliable machine, with the only drawback being its small cable, which of course you can replace with another one, so it's a minor issue. The length of the cable is simply satisfactory. It is a quiet machine with a lightweight but sturdy construction. I am completely satisfied with this purchase, after extensive market research. I highly recommend it.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • ydrotexnikh
    4
    7 out of 7 members found this review helpful
    ydrotexnikh
    Store representative
    This review is about the welding current (max): 150 A

    It is a very reliable and powerful machine. I used it with a 3.2mm electrode and it didn't notice a thing. I didn't use it with a smaller electrode that obviously would throw it off. Four stars only for its short cables (about 1.80 to 2 meters), otherwise it didn't let me wait for it to cool down after hours of operation, working only with three-point electrodes. I highly recommend it.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • 1
    Babis_Doudesis
    This review is about the welding current (max): 150 A

    Unacceptable, I wonder about the so many good reviews.....

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    emmanios

    Verified purchase

    This review is about the welding current (max): 150 A

    excellent choice. highly recommended

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    vitalios_todikidis

    Verified purchase

    This review is about the welding current (max): 150 A

  • 5
    Stamatis_Andreou6336

    Verified purchase

  • 5
    GALAXYS4

    Verified purchase

    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    Chris_Xionidis
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    grafanakisdim

    Verified purchase

    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
  • Babis_Anastasioy
    5
    Babis_Anastasioy

    Really good machine. I stuck with a 2.5 electrode and I was completely satisfied at 80A. I compared it to another electronic one I have and I can say that the machine is much more powerful. Its cables are close, but I don't think that's a problem. I also have alternatives from the other welding machine that fit and are far away. After all, these work with continuous current so we don't need excessively long cables, since continuous current doesn't go far. I recommend this welding machine.

    Translated from Greek ·
    3
  • Avtwvhs_GR
    5
    Avtwvhs_GR

    I bought it for amateur use, on sale for 169 euros from Leroy Merlin, replacing an old classic 150 kg (not Amper) electric welding machine... In the very first job, on a garage door, I encountered the issue that I had already read about regarding the short cables. They are really VERY short... However, that was the only negative aspect! And it can be easily fixed! My welds were truly PROFESSIONAL! Without being an expert. While with the old welding machine, it seemed like the work was not done by a professional. Very easy to use, very easy to transport, I don't know its capabilities on a professional level, but for anyone who is an amateur like me, it is an excellent choice.

    Translated from Greek ·
    4
  • kaleonidas
    5
    kaleonidas

    The welding is quite good even though it is my first one, but it is very easy to use and makes strong welds. I have been working with it for a while without it getting hot. The cable length is short but someone can change them

    Translated from Greek ·
    1
  • georginaki.91
    5
    georginaki.91

    It is a very good and reliable machine, with the only drawback being its small cable, which of course you can replace with another one, so it's a minor issue. The length of the cable is simply satisfactory. It is a quiet machine with a lightweight but sturdy construction. I am completely satisfied with this purchase, after extensive market research. I highly recommend it.

    Translated from Greek ·
    1
  • ydrotexnikh
    4
    ydrotexnikh

    It is a very reliable and powerful machine. I used it with a 3.2mm electrode and it didn't notice a thing. I didn't use it with a smaller electrode that obviously would throw it off. Four stars only for its short cables (about 1.80 to 2 meters), otherwise it didn't let me wait for it to cool down after hours of operation, working only with three-point electrodes. I highly recommend it.

    Translated from Greek ·
    7
  • See all

Description & Specifications

INFINITY 220 INVERTER Electrode MMA-TIG

Specifications

  • Weight: 6.5 kg
  • Frequency: 50-60 Hz
  • Voltage: 230 V
  • Protection Degree: IP21
  • Max Electrode Diameter: 4.0 mm
  • Power: 5.0 KVA
  • Welding Current: 15-200 A
  • Efficiency: 60% 200 A

Description

High reliability welding with 3rd generation electronic systems (IGBT). Reduced weight and dimensions, low power consumption (energy efficient). Smooth and easy arc starting with high stability, despite voltage fluctuations in the network. The Arc Force, Hot Start, Anti-Stick systems are now part of the basic equipment of the TELWIN family.

Arc Force: Automatic current calibration during welding. Hot Start: Prevents the flame from extinguishing when the electrode is in contact with the welding object. Anti-Stick: Prevents the electrode from sticking to the welding point. Thanks to the high quality of power production (Low Distortion Quality System), it has the ability to weld electrodes up to 4mm.

Thermostatic overvoltage-undervoltage protection, overcurrent protection, generator protection (± 15%). Ability to use the following types of electrodes: rutile, basic, stainless steel, cast iron, etc.

Complete with MMA welding accessories.

Includes:

  • Ground cable
  • Electrode holder cable

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Dimensions

Type
TIG, MMA

Type

TIG

Slow welding for detailed work on aluminum and stainless steel, mainly. Requires experience and connection to an external gas cylinder. Does not create "spatters".

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
35 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
5 kVA

Power: 5


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
6600 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (12)

5.0
12
5.0
Review this product
  1. 10
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1
Review this product
  • Power
  • Machine durability
  • Construction quality
  • Weight
  • Volume
  • Easy to use
  • Value for money
  • Welding cable length
  • Babis_Anastasioy
    5
    3 out of 4 members found this review helpful
    Babis_Anastasioy
    This review is about the welding current (max): 150 A

    Really good machine. I stuck with a 2.5 electrode and I was completely satisfied at 80A. I compared it to another electronic one I have and I can say that the machine is much more powerful. Its cables are close, but I don't think that's a problem. I also have alternatives from the other welding machine that fit and are far away. After all, these work with continuous current so we don't need excessively long cables, since continuous current doesn't go far. I recommend this welding machine.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • Avtwvhs_GR
    5
    4 out of 4 members found this review helpful
    Avtwvhs_GR
    This review is about the welding current (max): 150 A

    I bought it for amateur use, on sale for 169 euros from Leroy Merlin, replacing an old classic 150 kg (not Amper) electric welding machine... In the very first job, on a garage door, I encountered the issue that I had already read about regarding the short cables. They are really VERY short... However, that was the only negative aspect! And it can be easily fixed! My welds were truly PROFESSIONAL! Without being an expert. While with the old welding machine, it seemed like the work was not done by a professional. Very easy to use, very easy to transport, I don't know its capabilities on a professional level, but for anyone who is an amateur like me, it is an excellent choice.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • kaleonidas
    5
    1 out of 2 members found this review helpful
    kaleonidas
    This review is about the welding current (max): 150 A

    The welding is quite good even though it is my first one, but it is very easy to use and makes strong welds. I have been working with it for a while without it getting hot. The cable length is short but someone can change them

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • georginaki.91
    5
    1 out of 1 members found this review helpful
    georginaki.91
    This review is about the welding current (max): 150 A

    It is a very good and reliable machine, with the only drawback being its small cable, which of course you can replace with another one, so it's a minor issue. The length of the cable is simply satisfactory. It is a quiet machine with a lightweight but sturdy construction. I am completely satisfied with this purchase, after extensive market research. I highly recommend it.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • ydrotexnikh
    4
    7 out of 7 members found this review helpful
    ydrotexnikh
    Store representative
    This review is about the welding current (max): 150 A

    It is a very reliable and powerful machine. I used it with a 3.2mm electrode and it didn't notice a thing. I didn't use it with a smaller electrode that obviously would throw it off. Four stars only for its short cables (about 1.80 to 2 meters), otherwise it didn't let me wait for it to cool down after hours of operation, working only with three-point electrodes. I highly recommend it.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • 1
    Babis_Doudesis
    This review is about the welding current (max): 150 A

    Unacceptable, I wonder about the so many good reviews.....

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    emmanios

    Verified purchase

    This review is about the welding current (max): 150 A

    excellent choice. highly recommended

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    vitalios_todikidis

    Verified purchase

    This review is about the welding current (max): 150 A

  • 5
    Stamatis_Andreou6336

    Verified purchase

  • 5
    GALAXYS4

    Verified purchase

    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    Chris_Xionidis
    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
  • 5
    grafanakisdim

    Verified purchase

    This review is about the welding current (max): 150 A

    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
  • Babis_Anastasioy
    5
    Babis_Anastasioy

    Really good machine. I stuck with a 2.5 electrode and I was completely satisfied at 80A. I compared it to another electronic one I have and I can say that the machine is much more powerful. Its cables are close, but I don't think that's a problem. I also have alternatives from the other welding machine that fit and are far away. After all, these work with continuous current so we don't need excessively long cables, since continuous current doesn't go far. I recommend this welding machine.

    Translated from Greek ·
    3
  • Avtwvhs_GR
    5
    Avtwvhs_GR

    I bought it for amateur use, on sale for 169 euros from Leroy Merlin, replacing an old classic 150 kg (not Amper) electric welding machine... In the very first job, on a garage door, I encountered the issue that I had already read about regarding the short cables. They are really VERY short... However, that was the only negative aspect! And it can be easily fixed! My welds were truly PROFESSIONAL! Without being an expert. While with the old welding machine, it seemed like the work was not done by a professional. Very easy to use, very easy to transport, I don't know its capabilities on a professional level, but for anyone who is an amateur like me, it is an excellent choice.

    Translated from Greek ·
    4
  • kaleonidas
    5
    kaleonidas

    The welding is quite good even though it is my first one, but it is very easy to use and makes strong welds. I have been working with it for a while without it getting hot. The cable length is short but someone can change them

    Translated from Greek ·
    1
  • georginaki.91
    5
    georginaki.91

    It is a very good and reliable machine, with the only drawback being its small cable, which of course you can replace with another one, so it's a minor issue. The length of the cable is simply satisfactory. It is a quiet machine with a lightweight but sturdy construction. I am completely satisfied with this purchase, after extensive market research. I highly recommend it.

    Translated from Greek ·
    1
  • ydrotexnikh
    4
    ydrotexnikh

    It is a very reliable and powerful machine. I used it with a 3.2mm electrode and it didn't notice a thing. I didn't use it with a smaller electrode that obviously would throw it off. Four stars only for its short cables (about 1.80 to 2 meters), otherwise it didn't let me wait for it to cool down after hours of operation, working only with three-point electrodes. I highly recommend it.

    Translated from Greek ·
    7
  • See all
465,00 €
23,00 €   shipping cost