The MOES S03-CO-EU-MS detector detects carbon monoxide (CO) and measures air temperature and humidity. The AetherSentinel sensor measures CO concentrations from 0 to 999 PPM, with an accuracy of ±10% and a resolution of 0.5 PPM. The LCD displays the CO concentration, risk level, temperature and relative humidity in real time.
The three-level warning system uses a bright LED ring, on-screen indicators and an audible alarm. At 50–99 PPM, a warning tone sounds every 2 minutes, while above 99 PPM, a red light and audible alarm are activated every second. The warning alarm can be temporarily silenced using the dedicated button, while the red alarm cannot be silenced. The built-in rechargeable battery provides up to 12 hours of operation in the event of a power outage.
- Type: Carbon monoxide detector
- Sensor: AetherSentinel
- CO detection range: 0–999 PPM
- CO measurement accuracy: ±10%
- CO measurement resolution: 0.5 PPM
- Warning levels: 3
- Alarm volume: 85 dB
- Temperature range: -10 °C to 50 °C
- Temperature measurement accuracy: ±1.5 °C
- Relative humidity range: 0–95% RH
- Humidity measurement accuracy: ±5%
- Display: Colour LCD, 240 × 296
- Display brightness settings: 3 levels
- Battery: Rechargeable, 1000 mAh
- Backup operation during power outage: Up to 12 hours
- Power supply: Mains-powered
- Type
- Carbon Monoxide Detector
- Thread
- No
- Autonomous
- No
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.