Skroutz.mt

Ingco Welding Machine Inverter MMA with Maximum Welding Current 200A and Duty Cycle 60%
Welding Machines

Ingco Welding Machine Inverter MMA with Maximum Welding Current 200A and Duty Cycle 60%

Key features:

  • Voltage: 220-240V
  • Protection Level: IP21S
  • Output Current: 10-200A
  • Frequency: 50/60Hz
  • Insulation Class: H
See full description

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    240

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    8.7

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
Product report

Description

Description

Capabilities

Inverter MMA welding machine from the manufacturer Ingco, where the inverter technology enhances the performance and durability of the machine and contributes to reducing its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. It can operate continuously for 6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thicker welds with fewer passes. Its weight reaches 5kg.

Features

  • Performance: 200A / 60%
  • Protection Level: IP21S
  • Electrode Size: 1.6-5.0mm
  • Output Current: 10-200A
  • Frequency: 50/60Hz
  • Insulation Class: H
  • Voltage: 220-240V
  • No-load Voltage: 70V
  • Shipping Weight: 6.00 kg
  • Package Contents: 1 set of Cables (clamp and body) 1 pc. Wire Brush 1 pc. Mask

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MMA

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
240 V

Supply Voltage: 240


It is the supply voltage that the machine requires from the electrical grid.
Power
8.7 kVA

Power: 8.7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
5 mm

Maximum Electrode Diameter: 5


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
5000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • GrigoriosP
    5
    2 out of 3 members found this review helpful
    GrigoriosP

    Good evening, I have had this welding machine for a year now, I have it for domestic use and I am very satisfied. For its price, it is a very good choice. The length of the cables did not bother me because I mainly use it on a workbench, the only thing I didn't like is the indications on the regulator, it shows completely unrelated values and with incorrect gradation, completely empirically and compared to the fronius I have at work, at 65 fronius it corresponds to 100 on the ingo, but be careful, this difference only applies to the indication, not the ratio of the travel distance!
    Otherwise, the technology for easy start and preventing electrode sticking works satisfactorily.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • GrigoriosP
    5
    GrigoriosP

    Good evening, I have had this welding machine for a year now, I have it for domestic use and I am very satisfied. For its price, it is a very good choice. The length of the cables did not bother me because I mainly use it on a workbench, the only thing I didn't like is the indications on the regulator, it shows completely unrelated values and with incorrect gradation, completely empirically and compared to the fronius I have at work, at 65 fronius it corresponds to 100 on the ingo, but be careful, this difference only applies to the indication, not the ratio of the travel distance!
    Otherwise, the technology for easy start and preventing electrode sticking works satisfactorily.

    Translated from Greek ·
    2
  • See all

Description & Specifications

Capabilities

Inverter MMA welding machine from the manufacturer Ingco, where the inverter technology enhances the performance and durability of the machine and contributes to reducing its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. It can operate continuously for 6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thicker welds with fewer passes. Its weight reaches 5kg.

Features

  • Performance: 200A / 60%
  • Protection Level: IP21S
  • Electrode Size: 1.6-5.0mm
  • Output Current: 10-200A
  • Frequency: 50/60Hz
  • Insulation Class: H
  • Voltage: 220-240V
  • No-load Voltage: 70V
  • Shipping Weight: 6.00 kg
  • Package Contents: 1 set of Cables (clamp and body) 1 pc. Wire Brush 1 pc. Mask

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MMA

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
240 V

Supply Voltage: 240


It is the supply voltage that the machine requires from the electrical grid.
Power
8.7 kVA

Power: 8.7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
5 mm

Maximum Electrode Diameter: 5


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Weight
5000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • GrigoriosP
    5
    2 out of 3 members found this review helpful
    GrigoriosP

    Good evening, I have had this welding machine for a year now, I have it for domestic use and I am very satisfied. For its price, it is a very good choice. The length of the cables did not bother me because I mainly use it on a workbench, the only thing I didn't like is the indications on the regulator, it shows completely unrelated values and with incorrect gradation, completely empirically and compared to the fronius I have at work, at 65 fronius it corresponds to 100 on the ingo, but be careful, this difference only applies to the indication, not the ratio of the travel distance!
    Otherwise, the technology for easy start and preventing electrode sticking works satisfactorily.

    Translated from Greek ·
    • Power
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Value for money
    • Welding cable length
    Did you find this review helpful?
  • GrigoriosP
    5
    GrigoriosP

    Good evening, I have had this welding machine for a year now, I have it for domestic use and I am very satisfied. For its price, it is a very good choice. The length of the cables did not bother me because I mainly use it on a workbench, the only thing I didn't like is the indications on the regulator, it shows completely unrelated values and with incorrect gradation, completely empirically and compared to the fronius I have at work, at 65 fronius it corresponds to 100 on the ingo, but be careful, this difference only applies to the indication, not the ratio of the travel distance!
    Otherwise, the technology for easy start and preventing electrode sticking works satisfactorily.

    Translated from Greek ·
    2
  • See all
199,00 €
17,00 €   shipping cost